Tag Archives: OAL2018

Completed: Popover Tank & Lander Pants (Plus: OAL Winners!)

10 Aug

Heeeey everyone!!

Before I dive into garment details, I want to congratulate our OAL 2018 Winners!


Dizzy Erica made a Lady Skater dress + Hetty Cardigan! Interestingly, I was just rediscovering my love for both these patterns the other day! I am happy to see that the Lady Skater in particular is still going strong and living up to it’s awesomeness 😀
Wendy made a Waters tee + an A Frame skirt. I love the colors she choose – perfect summer outfit!


lsorenson7208 made the Rabbitbrush cardigan & Lander Pants! I am really digging this monochromatic look – I always find black and white to be so chic.

Big congratulations to our winners – and thank you to everyone who participated! You can see all the finished outfits in the OAL 2018 Finished Outfits thread on Ravelry. Also, a massive thank you to our sponsors The Confident Stitch & Indie Stitches for supplying prizes! And thank you, Andi Satterlund, for hosting this with me again!

*

You’ll notice that I didn’t share my OAL project – and it’s not in this post, either (surprise!). I did finish my Lander shorts and have worn them loads, but sadly my Waters tee is still on my needles as of this posting. Can’t even finish my own outfit in time for the OAL I am hosting, I am the worst! In all seriousness, I started to fall out of love with the project – I’m not happy with my stripe sequence, and honestly, I need to frog it and start over! Rather than force myself to finish something that I likely wouldn’t want to wear, it’s sitting in time-out until I can be sure that I need to either frog it or finish it. I don’t like keeping UFOs, but sometimes you need a breather to think about your options and next steps.

*

Ok so anyway, on to this post! Featuring a DIFFERENT pair of Lander pants, mwahahaha!

AMH Popover Tank

But first, I want to share my tank with you because it’s super cute!

AMH Popover Tank

No lie – every single time I wear this top, I get people practically foaming at the mouth to ask what pattern is that! Here’s your answer – it’s the Anna Maria Horner Popover Tank! This is a pattern that Anna released to be used specifically for garment classes at Craft South. I’ve taught this class a LOT – it’s a great first project, easy to sew and looks super cute! And it can be sewn in 3 hours (YES, SERIOUSLY). But I’ve never made one for myself – just loads of samples. When Anna released it as a paper pattern and included a cropped version, I was ready to give it a try.

AMH Popover Tank

This is a super, super simple pattern. Two pattern pieces, then 1″ strips of knit fabric to be used as facings around the neck and arms. No darts, no closures, barely any pattern markings, and an easy fit. Students learn how to sew French seams, apply knit facings, and sew a 1/4″ rolled hem.

One tip I will give if you want to make this pattern is to check the finished measurements, and possibly consider sizing down. I find the recommended sizes to be a bit loose-fitting, especially around the arms, but you can go for it if that is your jam! I made the size XXS, although my measurements put me at the cusp of XS. I like the size of the armholes and the fit of the bust. My fabric is also lightweight with more give than your typical quilting cotton, so that helped.

The only change I made was to swap out the knit facings for actual woven bias facings. I didn’t have any knit fabric that remotely matched my fabric, and I prefer the bias facings anyway. Knit facings are wonderful to keep the class at 3 hours, but when I’m sewing at home on my own time I do what I want! I used some beautiful lightweight cotton voile and applied the bias facings the same way I always do. No need to trim seam allowances, either – the knit strips are also sewn on a 1/4″.

AMH Popover Tank

I love the back – the shoulders wrap around and make a v at the center back, which is then topstitched. I told you, this pattern is easy!

AMH Popover Tank

I should mention my fabric – it’s a beautiful lightweight cotton that I bought at Nagada while I was in Egypt! I only bought a yard – it was expensive, even by American standards – and waited a loooong time to find a good pattern to match it with. The raw applique reminds me of Alabama Chanin, and I love the soft neutrals.

Since the fabric has some texture that makes the thickness a bit uneven, I didn’t do the French side seams and instead just serged them. This is also why I used lightweight voile for my woven bias facings, instead of self-fabric.

Just a head’s up – the cropped version is SHORT. Like, it will expose your belly button. I wanted to lengthen mine… but I forgot and just cut shit out. Oops. Soooo my hem is the tiniest thing ever, serged and rolled under as little as possible. It’s still short, but I like it with high-waisted pants. FYI for your Popover Project, tho.

Here, have some more photos. I don’t know why I took so many.

AMH Popover Tank

AMH Popover Tank

AMH Popover Tank

AMH Popover Tank

AMH Popover Tank

AMH Popover Tank

Whew.

BUT WAIT, THERE’S MORE!

True Bias Lander pants

True Bias Lander pants

My second pair of Lander pants! Sorry these photos are basically useless, navy is super hard to photograph.

I didn’t make too many changes on these vs my red pair… according to my notes (that I now take in a little notebook whenever I sew, specifically for this reason haha), I made a size 2 but used the size 4 at the side seams. I made the pockets slightly smaller, although I still think they are a little big. I also shortened the legs by 1″ at the shorten line, and interfaced the fly shield. I’m sure I had to take a little out of the center back, but I don’t remember how much, sorry!

I definitely like these even more than my red ones. I think the proportions and length are a little more flattering, and the fabric is super swishy so they are fun to wear!

True Bias Lander pants

The fabric is a navy tencel twill that I bought at Mulberry Silks when I was in North Carolina earlier this year! It’s a beautiful weight with a soft drape, making my ideal pants! I found this fabric easier to work with than silk, but it was still a little wiggly… like using a heavier weight rayon challis.

I lined the pockets with silk crepe (from my stash), and the buttons are also from Mulberry Silks! Look closely, you can see that I already lost one 😦 This is what I get for wearing my shit before I photograph it! The button stayed intact for months, and I literally lost it on a flight home (I think) the day before I took these photos. I’m sad because I really loved these buttons, but I’m also mad at myself for not buying an extra. As for how I lost it… well, they are wooden shank buttons, and that one button had a tiny crack in the shank that caused it to fly off. I found it the first time, repaired the crack (or so I thought) and decided to just sew the bottom button hole shut so there would be less stress on the button. It worked for a while, but not anymore! I will replace them when I find a suitable button that fits the holes (::sob::), but in the meantime… I’m just gonna wear them with 3 buttons. Who the fuck cares? Did you see that missing button in my photos above? Are you looking now? ZOOM IN, I DARE YOU.

True Bias Lander pants

True Bias Lander pants

Anyway, big thumbs up for these pants! I especially love them for traveling – they are my summer flying pants. I always get cold on planes and in airports, but I hate wearing skinny jeans and then sweating to death when I step in 90 degree heat once I reach my destination. These are perfect because they keep my legs covered, but they are breezy in the heat. The color goes with everything, and the high waist looks great with a cropped something or with a loose tshirt tucked in!

True Bias Lander pants

I feel like this post has gotten out of hand long, so I’m going to stop now. Have a great weekend, everyone!

Advertisements

OAL 2018: Quick Waistband Adjustment

12 Jul

Hello everyone! It’s been a minute since I mentioned the OAL, but we are still going strong (and it’s wrapping up in the next couple of weeks, meaning, YOU STILL HAVE TIME TO PARTICIPATE). I wanted to check in and see how everyone is doing, and also offer a little hack-y fitting tip for your Lander waistband (or any straight waistband, for that matter!).

BUT FIRST I wanted to share this – I’m on a podcast!

I was super honored to be interviewed for the Love to Sew podcast recently, and my episode just aired! I’ve been a long time fan of this series, so it was pretty flattering to get my own episode! If you are interested in checking it out, you can listen to the episode here. I hope you enjoy it!

Now, onto the rest of the blog post!

You’ll have to forgive me in advance because I don’t have photos of the progress (just the result); I was experimenting and not sure how this would pan out (story of my life). But I think this is a pretty simple and straightforward adjustment, so hopefully my words are enough to convey the information across 🙂

One of the features of the Lander Pants & Shorts is that they include a straight waistband made from a single piece of fabric. This is very simple to sew, but may not result in a perfect fit if you are especially curvy. Some people get excess fabric and gaping at the center back, since the waistband does not curve with their back. This does not indicate a bad pattern – it just indicates a draft that does not correspond with that particular body shape (there are PLENTY of bodies that fit great in a straight waistband, and PLENTY of bodies that can’t do a curved waistband, etc). This is something than can easily be adjusted by changing the waistband to a curved waistband (or, better/lazier yet – stealing a curved waistband from another pattern and using that), but you have to do it before you actually cut your fabric. If you’ve already sewn your waistband on and are experiencing this – read on!

My previous 2 pairs of Lander pants did not gape very much, and I was easily able to fix it by simply wearing a belt. Since these are shorts, and they felt like they were gaping a little more than I was comfortable with, I wanted to try to find a way to eliminate the gape without needing to wear a belt (it’s hot outside, I don’t need a layer of LEATHER around my waist amirite). Of course, one option it to unpick the waistband, pinch out the excess into a dart (creating a curved waistband, but with a seam), and then taking out the excess in the pants either at the center back or the darts (or all). I wanted my waistband to be fitted while also still being comfortable, so I thought I’d try a little bit of elastic at the back instead.

OAL 2018: Adjusting the Waistband

I cut two slits on the inside of the waistband, positioning them as best I could under the side back belt loops (to hide the topstitching I was able to do next). I only needed to take in a little bit – maybe 1/2″ at most – but in my experience it’s good to stretch this amount over a longer length than you need, which will make things less bunchy.

I fed a length of elastic that fit in my waistband (I found that 1.5″ wide elastic fit perfectly in the topstitched waistband), pinned one end down, and tried them on to determine the best length of elastic – i.e., tight enough to pull in the gape, but not so tight it was starting to gather.

OAL 2018: Adjusting the Waistband

After cutting the elastic, I secured each short end down with a zigzag stitch. Since these are under the belt loops, they aren’t visible from the outside. Then I stitched closed the holes I had made inside the waistband.

OAL 2018: Adjusting the Waistband

Here is how it looks on the inside (oops, I need to re-sew that hole closed I guess haha)

OAL 2018: Adjusting the Waistband

And the outside!

And finally – some gratuitous shots of my butt so you can see what they actually look like on:
(I am really sorry)

OAL 2018: Adjusting the Waistband

OAL 2018: Adjusting the Waistband

As you can see, it mostly flattens out so it is not super gathered. It snugs up the waistband enough so that it sits flat against my back, but the elastic will stretch if needed (i.e., tacos) so they are still comfortable.

This is a SUPER easy and quick fix if you need a minimal adjustment at the back waist – like I said, mine was no more than 1/2″. It’s also definitely a hack fix – the proper way would be to make a flat pattern adjustment to the waistband so it is curved – but sometimes I think a hack is good enough. If it’s the difference between you wearing the pants and not wearing the pants, I’d say it’s worth a try!

I also realized I never shared my yarn or stripe ideas for my Waters tee! God you guys I am awful.

OAL 2018: Sweater Progress

Here is where I’m at as of this posting. Making good progress, which wasn’t evident until I took this photo, if I’m being completely honest! I’m heading to Canada today to teach a couple of jeans workshops at Darrell Thomas Textiles (and I *think* there is still an open seat for the weekday class, ahem), and I’m hoping I can knock the rest out pretty quickly because I am dying to wear this thing!!!

My yarn is Quince & Co. Sparrow, and the colors are pigeon and lunar (I don’t know why it looks black in these photos, pigeon is actually a nice blue-grey. Oh right because I can’t take photos to save my life lololol). I changed my stripes to be a basic 4×4, and the edging will be the darker color. I need to decide which side I want to be the right side, though – because the purl side looks pretty freaking rad, too!

Ok, I think that’s all! How is everyone doing with their OAL projects? Have you finished yet?

OAL2018: Belt Loops & Waistband

18 Jun

Good morning, everyone! If you are participating in this year’s OAL, you should be rocking and rolling along with both your sewing & knitting projects. As I mentioned in the announcement, I will not be offering full tutorials for sewing the Lander Pants – there is a great sewalong available for free on the True Bias website, should you need the additional support – but I did want to pop in and share an alternate method for sewing the belt loops & attaching the waistband. Even if you are not participating in this year’s OAL, I hope you will find this useful!

OAL 2018: Belt Loops & Waistband

You’ll want to make your belt loops before you attach the waistband (note that you can also attach the belt loops after the waistband if you prefer! For the sake of simplicity, I am following the pattern directions here). The pattern has you sew a tube that you turn right side out and press flat. This is a great method if you are sewing with a lightweight fabric, but it can be a nightmare to try to turn that skinny tube if you are using a heavier fabric, especially denim. Even my red linen doesn’t like being pulled like that! So here is an alternate method if you are using a thicker fabric, or just hate turning tubes 🙂

OAL 2018: Belt Loops & Waistband

Finish one long edge of the belt loop piece. I used a serger, but you can also sew over the edge with a zigzag stitch, or bind with fabric.

OAL 2018: Belt Loops & Waistband

The pattern is designed for the finished belt loops to be about 1/2″ wide. You may want to trim 1/8″ off the long (unfinished) edge of your piece if you want to maintain that measurement. Otherwise, your belt loops will end up being about 5/8″ wide.

OAL 2018: Belt Loops & Waistband
OAL 2018: Belt Loops & Waistband

Starting with the unfinished side, fold the belt loop into thirds with the right sides facing. You will end with the finished edge on top, hiding all raw edges. Be nitpicky here and do your best to get the finished edge right EXACTLY on top of the first fold.

OAL 2018: Belt Loops & Waistband

Topstitch along both long sides at 1/8″. This is why it is so important to get the finished edge right on the fold – if you are too close to the center, the stitching line won’t catch it.

And that’s it! This gives the same effect as the turned-tube-belt-loop-, but I find it a lot easier to sew. From here, you can cut your belt loop into 5 pieces and attach them to the top of the pants as instructed.

Now, for the waistband!

If this tutorial seems like deja vu, it’s because I’ve showed it before on my blog! I wanted to show it again for those who missed it the first time, and also to show that it does work for one piece waistbands as well as two piece!

OAL 2018: Belt Loops & Waistband

On your interfaced waistband piece, fold up one long edge a little bit less than the seam allowance (this pattern is 1/2″, so I folded up my edge at 3/8″) and press.

OAL 2018: Belt Loops & Waistband

This is gonna seem ass-backwards – just bear with me! Attach the waistband to the INSIDE of the pants, with the right side of the waistband facing the wrong side of the pants. Sew all the way around at your normal seam allowance, making sure to leave at least 1/2″ overhang at each end (you can always cut off any excess). You will sew all the way around, from one opening to the other. If your pants have a zipper, make sure that it is unzipped and sew right across the zipper – just go slow so you don’t break your needle on the teeth.

OAL 2018: Belt Loops & Waistband

Now you’ll fold the waistband back on itself, with the right sides facing. The side that has been folded and pressed – i.e., the side that was not sewn to the pants) should hang below by about 1/8″-1/16″. This is to ensure that the stitching line you just did will be covered when you turn the waistband right side out.

Now, stitch along the short edge, keeping in line with the center front edge of the pants. It may be helpful to draw a guideline here first with a ruler (which is exactly what I do – no shame here!).

OAL 2018: Belt Loops & Waistband

Trim one of the seam allowance layers in half. Do not trim the corner, keep some seam allowance there.

OAL 2018: Belt Loops & Waistband

Now you will turn the waistband right side out! To get a nice, crisp corner, start by sticking your thumb in the waistband up to the corner.

OAL 2018: Belt Loops & Waistband

While your thumb is still in that corner, use your pointer finger to push the seam allowance down to one side (doesn’t matter which side) (Sorry, I don’t have pretty hands haha)

OAL 2018: Belt Loops & Waistband
OAL 2018: Belt Loops & Waistband

Keeping your fingers in that weird pinch, turn the waistband out to the right side.

OAL 2018: Belt Loops & Waistband

You should end up with a nice sharp corner here! You can use a point turner to really push the edge out if you need it to be even sharper 🙂 By holding the seam allowances in place when you turn right side out, this keeps the corner sharp (rather than trying to crap the seam allowances in after the fact). Keeping a bit of fabric in the seam allowances (rather than trimming down aggressively) also adds some structure to that corner, so it doesn’t collapse on itself.

OAL 2018: Belt Loops & Waistband

Finally, you can pin the remainder of your waistband down and topstitch from the right side, making sure to cover the first stitching line. I like to start at the center back and go all the way around the long rectangle, ending where I started. You can then cover the backstitching with a belt loop 🙂

OAL 2018: Belt Loops & Waistband

And that’s it! I love this method for attaching a waistband, because it ensures you get a beautiful, even topstitch on the outside without having to worry about catching the facing on the inside! It’s just EASY and basically fool-proof! You can also use this method for sewing in the round waistbands, cuffs (buttoned or in the round) and even collar stands.

Let me know if you have any questions!

Tutorial: Adjusting Crotch Depth (OAL2018)

5 Jun

Good morning, everyone!

In light of the official start to the OAL2018, I wanted to share a little tutorial for a very common pants adjustment – adjusting crotch depth. Even if you are not participating in the OAL, I hope you will find this useful! As I mentioned, this is a very common adjustment (at least half of my students in every Sew Your Own Jeans workshop that I teach ends up needing to make this adjustment!) that is a lot easier than it sounds.

This is the only pants-fitting post I’ll be doing for this OAL – most other adjustments can be done after the pants are basted at the side seams. If you have more pants-fitting needs, I absolutely recommend getting a copy of Pants for Real People (which is where the image below is from) – it is a fantastic resource that is full of valuable information and my top reference book when I’m fitting pants! Another post to check out is the Common Fitting Adjustments in the Lander Sewalong!

Common Pants Fit Adjustments – From Pants for Real People

So what does it mean to adjust crotch depth? The depth (versus the length, which runs from front waist to back waist) is the distance from your waist to the bottom of your crotch – i.e., the determining factor between a drop crotch and cameltoe. If you’ve ever had a wedgie, your depth is too short. Pants crotch hanging WAY lower than your actual crotch? Your depth is too long.

Since we are all special little sewing snowflakes (sewflakes?), all of our bodies are different – even in ways that aren’t super visible. Which means that not every single pants draft is going to fit every single person flawlessly – it’s just not possible. Personally, I have found that I have a slightly shorter crotch depth and generally need to make this adjustment with nearly every single pair of pants I sew. It’s not a hard adjustment to make, but if you’ve never seen is done before, it can be a little difficult to wrap your head around. Hopefully this tutorial will give you some insight on how to do it!

OAL2018: Shorten Front Crotch

First, you’ll want to make a muslin of your pants (or at the very least – a shorts version of the pants). Sew the front and back as instructed. You don’t need to include the whole fly setup (unless you want to practice sewing it!) or waistband (unless you anticipate needing to change it to a curved waistband). Pin the fly shut and move around a bit. Don’t freak out over wrinkles – muslin wrinkles like crazy (mine are extra bad because I pulled these out of my rag pile, true story) and doesn’t have as much “give” as your regular fabric. Feel where the crotch is in relation to your body – is it hanging too low and causing extra folds due to excess length? Is it all up in your business and giving you cameltoe?

OAL2018: Shorten Front Crotch

For a low-hanging crotch, pinch out the excess somewhere along the depth and pin it until it feels right. DO NOT OVERPIN – you don’t want to give yourself cameltoe (learn from my mistakes, people). Walk around, make sure you can sit, and let them settle a little. Likely, you won’t need to make a massive adjustment here – between 1/4″ – 1/2″ is most common. Little tiny fractions make a big difference when it comes to fit!

If your problem is the opposite and you need to add length, the easiest way to do this is to slice across the front of the pants and insert a strip of fabric (I just pin this, although you can sew it in, too). Pull down the bottom portion until the crotch feels like it is in the correct spot, then pin to the fabric strip.

I realize you likely cannot see a difference between those two photos (I mean… I definitely can’t haha). Like I said – it’s a small adjustment, and not always visible. But you can feel it!

OAL2018: Shorten Front Crotch

Check the back to be sure there aren’t any depth adjustments needed. I’d say that maybe 1 out of every 15-20 students of mine need to actually adjust the back – it’s usually all in the front. If you do need to adjust the back, do so the same way you adjusted the front. Mine looks fine, so I left it as is.

OAL2018: Shorten Front Crotch

Now take your muslin off, and measure the distance from pin to fold – or the additional length added by the strip of fabric. If you are only adjusting the front, then only measure at center front. If you are adjusting front + back, measure at the side as well as the center front and center back. This is how much you need to either add or remove from the depth.

OAL2018: Shorten Front Crotch

Now how to translate this to your pattern? Easy! Your pattern piece should have a lengthen/shorten line that cuts across the fly (if it doesn’t – first of all, SHAME ON THAT PATTERNMAKER, but second, it’s easy to just add it somewhere in that general area nbd). If you are only shortening the front crotch, you will cut along that line from center front *just* to the side seam. Do not cut through the side seam – you want to leave a hinge. If you are also adjusting the back, cut straight across from edge to edge.

OAL2018: Shorten Front Crotch

To lengthen, spread the pieces apart until the center front matches the measurement you took, and then fill the gap with paper and tape closed. If you are only lengthening the front, it should fade to nothing at the side seam.

OAL2018: Shorten Front Crotch

To shorten, overlap the pieces until the center front is overlapped by the amount you measured. Again, if you are only adjusting the front, it should fade to nothing at the side seams/hinge.

If you need to adjust all the way around to the back, you’ll want to walk your pattern pieces to make sure that the side seams still match after making your adjustment.

Finally, redraw any wonky links or curves (such as the crotch curve if you overlapped – just smooth the curve) and straighten the grainline if necessary. You will also want to shorten or length your fly pieces (shield, facing, etc) the same amount so that they match up when you sew them together. I strongly advise making another muslin as this point to be sure that they changes didn’t wonk something up. You do you, though!

And that’s it! Like I said, a really easy adjustment that can make a world of difference in how your pants fit and feel. This is definitely the most common adjustment I see in my Sew Your Own Jeans workshops, so I wanted to share it here too!

Announcing the 2018 OAL!

15 May

By popular demand, we’re back for another year!

Yes! The Outfit Along is back, and this year we are turning five! (whaaat!)

I’m teaming up with knit designer extraordinaire, Andi Satterlund, to host a combination knit-along and sew-along. The idea behind the Outfit Along (OAL) is to make a complete outfit by sewing a garment and knitting (or crocheting, if that’s more your thing) a garment. This is a great opportunity to fill your wardrobe with more beautiful handmade pieces, and we’ll have two official patterns that will have additional blog support, should you need it.

The official sewing pattern will be the Lander Pants by True Bias, and the official knitting pattern will be Andi’s newest design, Waters. I will be blogging about the official sewing pattern and Andi be blogging about the knitting pattern, so we can all sew and knit along together. If you don’t love the official patterns, you can still join in! The Outfit Along is about making an outfit you’ll actually wear, so to participate, all you need to do is to sew a garment and knit a garment to make an outfit. You’re more than welcome to pick projects that fit your own style and skills – after all, you’ll be the one wearing it 🙂 Make a knitted skirt and sewn top, make a dress and cardigan – doesn’t matter what the combination is, as long as it makes an outfit 🙂

You can read all the relevant details over at Untangling Knots – as well as a FAQ for common questions – but in a nutshell:

– We will be kicking off the OAL on June 1, 2018.
– The deadline for completion is July 31, 2018, which gives you two months to finish both garments.
– There IS incentive for finishing your garments within the deadline – PRIZES!!! We will be drawing 3 winners this year, and each winner will receive a $50 voucher to use at Indie Stitches, a $25 voucher to use at The Confident Stitch, and 4 patterns of their choice from the Untangling Knots Ravelry store.
– To be eligible for said prizes, you must finish BOTH garments by July 31, 2018 and post them in the OAL Finished Outfit thread in the Untangling Knots group on Ravelry. Prize winners will be randomly selected from those who finish both their knit and sewn garments and post pictures in the appropriate thread by the deadline.

So, now that’s out of the way – let’s talk about the patterns!

The official knitting pattern, Waters, is one I’m really excited about! Light and easy, uncomplicated and fuss-free, this linen pullover is the perfect garment to ease you toward the hot months of summer (or layer into the early cool months if you’re in another hemisphere!). The retro-style top features a high front neckline with a deep scooped back, classic skinny stripes (which can easily be customized if you prefer a different stripe option), and loads of relaxing stockinette. The pullover is knit seamlessly from the top down (editor’s note: upon proofreading, I originally had this written as “top dog” lolwut ok carry on), so there are very few purl stitches and even less seaming (aka: no seaming. Yay!). The yarn is Quince + Co Sparrow, which is a fingering weight linen yarn, and the fit should have 0-3 inches of positive ease – making this top super comfortable and cool to wear in the heat of summer.

If Waters looks vaguely familiar, that’s because it is! I love my Zinone from 2016’s OAL and wear it all the time – but reversed, with the lace in the front and the scoop in the back. Andi took a note from this riff and designed Waters to fit the same way, and at my suggestion we are using the same linen yarn because Y’ALL I LOVE THIS YARN. It’s a great price, knits up fast, and you can wash and dry it in the machines (which makes it even softer!). My zinone gets a lot of wear and I’m thrilled to have another linen knit to add to my wardrobe!

Anyway, I’m not saying that you need to knit the official OAL pattern this year… but you should really, really, really consider it. Plus, it’ll be 20% off until the OAL begins on June 1st when you you checkout on Ravelry using the coupon code OAL2018 – so yes, get you that discount!

The official sewing pattern, the Lander Pants, is already a beloved darling in the sewing community, and for good reason! The pattern features a super high waist, button fly (or optional zipper fly if you hate buttons!), and generous patch pockets on both front & back. The legs have a wide, straight fit, and three length options – full length, ankle length, or shorts.

I’ve already made a couple pairs of cropped Landers – the red linen ones I shared here on my blog last month (and, um, spoiler: my shorts will also be red linen LOL), and a pair of navy twill tencel ones that have yet to make an appearance. I LOVE this pattern and can personally vouch that it works great with my Zinone sweater, and am excited to pair it with the new Waters top!

Same as with last year’s OAL, I will not be doing a series of super in-depth tutorials of making this pattern from start to finish. I will, however, be posting project updates and my own personal tips for making this pattern! There is a full sewalong here on the True Bias blog if you need the extra help, though!

Again, if the Landers ain’t your thing – you don’t have to commit! The OAL is about what YOU want to wear, and you can absolutely choose a different pattern! 🙂 Another option we considered for this OAL was the Ginger Jeans. The new Jenny pattern from Closet Case Patterns would also be a great match for this sweater. And, of course, there are always skirts!

Should you need to pick up some fabric, our fabric sponsor, The Confident Stitch, has generously given us a discount code! Use the code OAL2018, and receive 15% off your entire order through June 15.

As always, you can spread the word by using the hashtag #OAL2018 or use this fancy badge. And don’t forget to join the OAL2018 discussion thread in the Untangling Knots group on Ravelry, for all your OAL chatting needs (and please tag me directly if you have a question, because sometimes I personally have a hard time with keeping up with all the action that happens in that thread ;)). Questions? Be sure to read the FAQ on Andi’s official announcement post in case it’s already been covered, but if not… ask away! 🙂 And don’t forget to use the OAL2018 discount code for 20% off the Waters knitting pattern + 15% of at The Confident Stitch!

YAY I’m so excited! Who is joining in this year? 😀