orange lingerie | LLADYBIRD

Tag Archives: orange lingerie

Completed: Cherry Print Knit Boylston Bra

What’s up everyone! I’m bringing it back a little old school today with a lingerie project – yes! I haven’t shared one of these in ages, since I feel like they can get a little redundant to talk about (I mean for me specifically, as the writer. How many times can you discuss the same pattern repeatedly before you get bored as hell? Yeahhh I’m not doing that!). But this project in particular is a little different and I think warrants its own blog discussion. So here we are!

Also, side note – I’m in the airport lounge as I write this and despite trying to find a sneaky little place where no one could see behind me, I think I failed and undoubtedly there is someone who is watching me upload photos of my underwear to the internet. So, there’s that too.

Anyway, about the bra in question! This is the Boylston pattern from Orange Lingerie. I’ve made this pattern a few times in the past, but it has admittedly been a minute since I whipped one up. My cup size has changed in the past couple of years, and while I wasn’t entirely sure what the new size was, I knew it wasn’t whatever I had been previously sewing. This is a balconette-style pattern, but it was, um, VERY balconette on me haha. I know one of the biggest hesitations that people have with starting to sew lingerie is the understanding that your first project(s) may not fit! And while I totally believe that it’s not an absolute waste if you were able to learn from the process, it still really sucks to make something that doesn’t fit the way you intended! This is where I stood with Boylston (and honestly, most bra patterns) until I finally sucked it up and just tried out a cup size bigger to see what would happen. And guess what?? EVERYTHING WAS FINE.

So that’s where this bra comes into play! I made the size 30DD, which is exactly the right amount of cup coverage (finally!). For fabric, this bra is made with… wait for it… jersey knit! Yes! Ever since this pattern was released, I have been DYING to try it in a jersey, which I believe was originally suggested by Norma in the big reveal. Since this pattern relies on foam cups, you can use pretty much any fabric as that area is already stabilized. I fell in love with the idea, but honestly, it took me almost this long to find a fabric that I felt deserved to be made into a bra.

My jersey knit is from Mood Fabrics and it was one of those last-minute purchases that grabbed my attention when I was filling up my cart and I just couldn’t say no. Y’all know I love a good cherry print – however, I don’t wear light blue. But it was on saleeee and it was cherriessss and I just… well it arrived at my house and I had to do something with it. This print was a great contender for turning into a bra as it is reasonably stable (not super flimsy and lightweight, like the knits I like to wear as garments) and the print is small so it’s not totally cut up by the pattern pieces. This specific fabric is unfortunately sold out, but Mood Fabrics has tons of other fun prints available on their website. The Cotton Jersey Prints specifically is the line that I pulled this one from, FYI!

After I pre-washed my fabric, I cut a small yardage off and block fused the entire thing with lightweight fusible weft interfacing. I wanted the knit fabric to be stable so that it would be easy to handle, and also work for a bra pattern (this pattern does not call for stretch fabrics, except at the very back band, so you want to stabilize your fabric in order for the garment to fit properly). Once the fabric was fused, I then cut all my pieces except for the back band (which, again, needs to remain stretchy). I also cut the cups out of foam, the bridge and frame pieces with sheer cup lining, and the back band pieces with medium weight powermesh. I like my bras to be lined (hence the sheer cup lining) and the powermesh was needed to keep the uninterfaced knit back pieces from stretching out over time.

Once all that was cut, this project sat in a WIP box for about a month. Ha! (not for lack of wanting to sew – but for traveling + moving house!) But once I was back in Sew Mode, this came together in a couple of hours! I raided my stash for notions and was pretty pleased with how well everything matches! I’m actually trying not to stash lingerie notions anymore (it can be really obnoxious to have everything you need for a project except some weird width of elastic in a particular color, or whatever) and in the future will just buy on a per-project basis. But in the meantime – I need to work through my stash. Other than the cherry fabric, this was 100% a stash-busting project! Yeah!

One question I get pretty frequently whenever I post a lingerie project is whether the pattern (whatever pattern I’m sewing) is good for a first-time bra sewer. While I do generally recommend Orange Lingerie as a good resource for first bra patterns (my first bra was a Marlborough!), I honestly would not recommend the Boylston for your *very* first. Making and inserting the foam cups can be a little confusing, and if you’re already embarking on a new adventure in lingerie then you probably don’t want to add any more stress than necessary! Once you’ve sewn up a bra or two and understand the general idea of how they are put together, though, I think this is a great next project!

After I finished the bra, I had enough fabric left over to make some matching undies!

I used the knit fabric (uninterfaced, to retain the stretch), and finished the edges with red fold over elastic. The pattern is the Acacia Underwear from Megan Nielsen patterns. These were super fast to sew and look really cute with my new bra!

I actually have tons of this fabric leftover (I think I bought 2 yards and lingerie sewing just barely sips on fabric yardage), so I may make some matching knit PJs. It’s a little too thick for what I like to wear as a tshirt, and the color isn’t something I’d reach for in the every day – but who knows, maybe wearing this set will change my mind 😉

Anyway, I think I’ve waxed poetic enough about this pattern *and* I’m pretty sure they just swapped out breakfast for lunch at the buffet which I desperately need to investigate so consider this blog post officially done!

Have you tried this pattern before in a knit fabric?

** Note: The fabrics used in this post were provided to me by Mood Fabrics in exchange for my participation in the Mood Sewing Network. All opinions are my own!

Tags: boylston bra, bra, cherries, completed, lingerie, Mood Fabrics, Mood Sewing Network, orange lingerie

Comments 9 Comments
Categories completed projects - new, Mood Sewing Network

Completed: Yellow Lace Marlborough Bra

5 Jul

Still playing catch-up with old makes here!

This bra was finished over a month ago, just before my family took our annual family vacation (we went to Charlestown instead of Florida this year! It was awesome, even if it did rain the entire weekend we were there, ha). I am one of those people who feels the NEED to have all-new clothes right before they leave for at trip (I’m not sure when that shifted for me – traditionally, I’ve always embraced vacations as the excuse to wear all your favorite outfits and feel smug that no one has ever seen them before so it’s kind of like they’re still new – if that makes sense!), and I try not to give into the temptation unless it’s something that truly fills a gap in my wardrobe. Considering the majority of what I wear in the summer tends to be either white or straight-up see-through, light-colored underwear – especially bras – is actually a fillable gap.

In the past, I’ve focused on off-whites and nudes – which, personally, I think are ugly and therefore really boring to sew (maybe your nudes are pretty, but the kind of nude that looks nude on me is just… meh. It’s like the same color they paint the walls of rentals because it’s so ~neutral~. Seriously, I literally repainted a rental once that was the exact same color as my skin. My ex-landlord even complimented it hahahahaha). However, someone pointed out to me once in the comments that lighter, pastel colors also work just as well, at least with my skin tone. I’m not a pastel sorta girl either – give me all the jewel tones! – but this feels like a happy compromise to me. And I can’t deny that the pale yellow lace is super pretty!

Once again, the pattern used here is the Marlborough Bra from Orange Lingerie. I’ve made this pattern to death – at this point, it’s more than paid for itself with how many renditions I’ve made. I love the way it fits my body, I love how comfortable it is (mostly because it fits right, haha) and I love how it looks, especially when sewn up in lace and has all those awesome scalloped edges.

I’ve mentioned this before, but this fabric combo is a winning Marlborough combo for me – stable fabric backed with sheer cup lining (except at the top lace edge, which is unlined). The top cup is stabilized with strips of Powermesh selvedge (rather than clear elastic – I just think it looks and feels better), and I like the narrower strap and band elastics with a 3 row hook and eye. My perfect bra!

I tried to mix this one up a little by converting the bridge to have more of an arch, using this tutorial from Emerald Erin. If you’re looking really hard and not seeing an arch – ummmm I don’t see it either! Apparently my angle was too subtle 😉 There’s even a painstakingly-matched seam up the middle of the bridge to accommodate my VERY NON-ARCH, all for naught, y’all. Whatever. It still looks pretty haha.

The fabric & all accompanying notions came from my favorite bra supply source, Tailor Made Shop! (this particular kit is currently sold out, but here is a similar one. Also, can we talk about how AMAZING this stretch charmeuse one is? Yeah, like I need another wild bra to add to my drawers haha). Ying actually came down to Nashville a few months ago, where we met up for hot chicken & beers, and she brought me this kit as a present. I’m only just now getting around to making it up, but I feel like it was worth the wait 😉

The kit includes everything you need to make an underwired bra – except the pattern and the underwires (I get my underwires from Bra Maker’s Supply – they fit my body shape well and I also have a huge stash I’m working my way through haha). It even includes enough sheer cup lining to line the entire bra, should you choose to do so. My favorite part about these kits is how the elastics match but aren’t all the same. There are both white and pale yellow elastics – matched up with the pale yellow lace and white mesh, and those little gold sliders on the straps… it all just goes together so well! I collect lingerie supplies like they are going to eventually stop producing them and my stash is currently enormous, but my matching and coordinating skills can’t compete with these kits!

I should mention, the one part of the bra that didn’t come in the kit is the little turquoise bow. I added that myself, from a piece of ribbon in my stash 🙂 It’s unexpected against all that white and pale yellow – I love it!

The good news about me taking so long to post this is that I can really comment on it’s comfort and durability! The bra has held up through multiple wears and washings (I hand wash my lingerie in the sink and lay it flat to dry – just FYI!), and it’s kept me supported and feeling beeee-you-ti-ful all the while!

That’s all for this one! Just looking at these photos makes me want to make another bra, ahh! 😀

Tags: bra, completed, lace, lingerie, marlborough, orange lingerie, tailor made shop

Comments 24 Comments
Categories completed projects - new

In Progress: Silk Polka Dot Boylston Bra

10 May

sewing with spiegel boylston bra

Hey everyone! I’m back with another bra post… again! This time, I’m trying something a little different though – I have made this bra *entirely* on my Spiegel 60609 machine. If you’ve followed my past bra posts, you will know how much I love using my old standby Bernina 350 for assembling lingerie, especially since the variety of feet that I have make things super easy. However, I was really curious to see how the Spiegel 60609 held up when it involves fussy lingerie sewing, so I used it for this project. And now I’m going to report my findings to you!

A few things I noticed that I think bear mentioning:
– I’m not a huge fan of the way the seam allowances are marked on the throat plate of this machine, as it makes it a little difficult to get a precise 1/4″ seam allowance. However, this is really easily solved by laying a piece of tape or even a Post-it note where your 1/4″ line should be. This is what I did, and it worked fine.
– The feed dogs (what move under your needle to push the fabric along) on this machine are AMAZING. Seriously, I didn’t have to pull my thread tails at all when starting or stopping a seam. The machine just pushed everything through without any snags or chewed up fabric – even with using silk crepe and teensy 1/4″ seam allowances. Color me impressed!
– The one downside I see to this machine is that you can’t move the needle in either direction – which is what I typically do to get accurate edgestitching (on my Bernina, I use the stitch-in-the-ditch foot and move the needle all the way to one side, it gives me a perfect 1/8″ without having to even really think about it). With that being said, I used the clear foot that comes with the Spiegel 60609, and found that the opening off the center of the foot is exactly 1/8″ from the needle. As long as you line this opening with the seam that you are edgestitching, you will get an accurate stitch. It does mean that you need to pay attention and maybe sew a little slower – but the 60609 also has a speed dial to slow things down, so no excuses now! 🙂
– There are a BUNCH of zigzag stitches on this machine!! For elastic insertion (which I’ll go over next week in part 2), I used stitch #226. I found the width to be perfect for what I needed.

The pattern I am using for this bra is the Boylston Bra from Orange Lingerie. This beautiful balconette pattern works for both foam cups and fabric cups, and features self-fabric straps and a really nice rounded shape. I’ve made it a few times in the past, and it’s a favorite of mine 🙂 I am making the size 30D.

For fabric, I am using silk crepe from Mood Fabrics (look familiar? I used it to make a top! Yay for lingerie using tiny scraps, ha!) for the outer, black power mesh from Tailor Made Shop for the back band, sheer cup lining from Bra Maker’s Supply, and black foam bra padding also from Bra Maker’s Supply. The elastics and notions are from various points in the NYC Garment District – I just have a giant stash that I pull from as I need stuff 🙂

I hope you like watching step by step progress shots, because that’s what you’re getting this week! 🙂

The pattern has you start by assembling the cups – there are 3 pieces that are sewn together with a 1/4″ seam allowance. Don’t know why, but I don’t have a picture of this step. You’ll just have to trust me haha 🙂 Make sure you backstitch at each end, as it’s really easy for stuff to come unraveled and make your (lingerie-makin’)life hellish!

For the foam cups, I cut all the same pieces and remove the 1/4″ seam allowances (more info on this here!). Then you butt the edges up against each other and attach them – in the same order as you sew the fabric cups – using a zigzag stitch.

Here is what the pieces look like when they’re attached. Pardon my yellow marking – those are the pattern notch markings (I use wax instead of snipping, since the seam allowances are so tiny).

Topstitching the pieces as instructed is also especially important, since a lot of fabrics used in lingerie don’t press very well. Here is what I was talking about in terms of using the foot as a topstitching guide – if you line up the open side with the edge of your fabric, as shown here, the needle will automatically hit exactly 1/8″ from the edge.

The fabric straps are folded in half and then sewn to the top of the cups, as shown, with the folded edge facing the center of the bra (the raw edges will be finished with elastic eventually).

Next, the foam cup is placed against the right side of the fabric cup, and pinned into place along the top edge. I also like to run that edge of the foam under the serger (with a 3 thread overlock) just to help flatten things a bit more, but that’s an optional step. Sew this seam at the normal 1/4″.

After sewing, you flip the foam to the inside and pull the fabric cup taunt to the edges, and pin everything down. This might require a bit of finessing with the fabric, which is normal! It’s also normal to have some excess fabric that needs to be trimmed off. I love how this finishes the top edge of the cup and also catches the strap! Once everything is as smooth as you can get it, go ahead and baste around the raw edges to secure everything, and then trim off any excess fabric so it’s even with the edge of the foam.

Assembling the bridge, cradle, and band are similar to assembling the cups – use 1/4″ seam allowances and follow the topstitching guide in the pattern. I chose to line my bridge and cradle with sheer cup lining, because it gives some extra stability to the silk crepe. Also, you can use the lining to encase the raw edges so the inside is nice and clean! You just want to lay your pieces so the fabric is on the right side, and the cup lining is on the wrong side – with the seam you’re attaching sandwiched in the middle. After sewing the seam, the outer fabric and cup lining flip up to cover the raw edges.

After the cups and bridge/frame/band are assembled, then you put them together (and THEN it really starts to look like a bra!). This part can seem a little fiddly, but it’s doable as long as you go slow and be mindful of what you’re sewing (again, slowing down the speed on the machine helps a lot). I find it helpful to use less pins – since you’re sewing a convex curve to a concave curve, you want to be able to stretch and pull the curves as you approach them (and pinning too much can limit that, at least in my experience). I pin the beginning and end of the seam, and the notch points marked on the pattern. That’s it! Another tip is always start at the center front – it’s very important to get those edges lined up perfectly.

Once everything is attached and I’m happy with how it looks, I trim down the foam seam allowance to reduce bulk. Time to add the underwire channeling! 😀 😀 😀

I find this step a little weird to explain and even harder to photograph, so here’s a picture of the instructions. The channeling gets attached to ONLY the cups of the bra, right on the seam allowance. Ideally, I like to be right along the seamline that I just sewed, but close enough is good enough 🙂

Again, the little notch in the clear foot that comes with the 60609 is perfect for lining up a 1/8″ seam allowance when attaching the casing. Sew all the way around until you get to about 1/2″-3/4″ away from the edge at the underarm, and leave that part unsewn (this will make it easier to attach the underarm elastic).

Here’s the casing after it’s been attached! For now, only one side is sewn down – the other side will be sewn once some of the elastics have been added.

I think that’s enough bra talk for today! 🙂 Next week, I’ll go over the steps for attaching the elastic and finishing the bra – aka THE FUN PART – and showing my completed Boylston! As always, let me know if you have any questions about this part of the process! 🙂

One more thing! We have a giveaway winner from last week! After some careful contemplation (aka Random Number Generator, hey-o!), our winner issssss….

winner

Yay congratulations, Rosemary!! I can’t wait to see what you make with your voucher! 😀

Thanks to everyone who entered the giveaway – and big thanks Contrado for your awesomely generous prize donation!

I’ll be back next week to finish that bra! Stay tuned!

Tags: boylston bra, bra, giveaway winner, in progress, lingerie, Mood Fabrics, orange lingerie, silk, silk crepe, spiegel, spiegel 60609, winner winner chicken dinner

Comments 22 Comments
Categories work in progress

Completed: Marlborough Bras for Spring (also some life-y updates, yay)

5 May

I say this every time I post about this subject, but I love making bras. Hell, I really love not having to buy bras. I just realized the last bra I actually purchased was when I was in London back in 2014. Pretty sweet!

Anyway, I don’t have a new bra pattern to share or even new techniques to talk about… so this post is going to be a repeat of most of my other lingerie-making posts. I really like how these turned out, though, which is why I’m showing you them! I used the same pattern for both bras – the Marlborough from Orange Lingerie – which is one of my favorite patterns to use (I also looove the Boylston, which is a foam cup – and don’t worry, I have a post for that to share next week HAHA). I love this pattern because it’s comfortable and supportive, fits me well with some very minor adjustments, and I think the shape is just beautiful. The fabric cups are really soft and natural looking (you better be ok with the world knowing that you are cold, though. I decided that was not something I was going to worry about anymore haha) and you can make it out of a really awesome variety of fabrics. After a lot of Marlboroughs, I’ve learned that my favorite fit comes from woven fabrics that are backed with sheer cup lining. I like slightly narrower straps (3/8″ or 1/2″, as opposed to the recommended 3/4″ for DD+) and a 3 row hook & eye. I use the size 30D.

Also, because I get this question ALL THE TIME – this is a fantastic beginner bra pattern. At least, it was for me! I’ve made some soft bras in the past, but this is the first “proper” bra pattern I ever made – with underwires and all that fun. The instructions are very clear and you can buy a kit that includes everything you need to make it. If you want more info on making bras, check out this post I wrote last year 😉

Bra #1 is really simple! I bought this sheer black polka dot mesh netting from Blackbird Fabrics (it appears to be sold out, but here is some in the white colorway), and Caroline threw in a black findings kit as a little bonus with my order. I can’t remember where I bought the sheer cup lining (I just got a lot of it so I have a big stash that I dip into haha) but it’s either from Blackbird Fabrics or Bra Maker’s Supply. Both are stores with I highly recommend, especially for their kits! Unfortunately, they’re both based in Canada which is a shipping bummer for us in the US. I’ve recently gone all up Tailor Made Shop‘s butt these days, and I’ve been really happy with everything I’ve received. And she is based in the US, so yay!

Anyway, back to the bra!

Since the fabric was pretty flimsy on it’s own, with a little more stretch than I needed, I lined every piece with black sheer cup lining- including the top where one would normally put lace. I thought about leaving that part sheer, but I think I made a good choice because I do like the resulting fit! Because all the pieces were lined, I was able to encase all the seams inside the layers, so the inside is very clean and makes me happy.

For the back, I used firm black power mesh on a single layer.

Flat bra shots:

All right, now for the second bra!

Bra #2 is definitely a bit wilder in terms of color, and yes it looks suspiciously like another Marlborough I made last year don’t you dare judge me 🙂 The fabric was given to me by Annessa – she was showing me something she made with it and I about lost my mind over how beautiful it was. So she offered to send me some scraps, which OF COURSE I accepted because I can totally sew a bra out of scraps! The lace is from Blackbird Fabrics – it was part of that aforementioned order – and the notions are just a bunch of stuff I pulled out of my stash (I think the strapping and gold hardware are from Tailor Made Shop, actually). I had fun putting this one together in terms of what colors to use – there are so many colors in the fabric, and I have collected a lot of elastics over the past couple of years! In the end, I went with white everything except the underarm elastic, which I think is really pretty.

Cutting the fabric was a bit of a bear because I was trying to place the colors with a bit of thoughtfulness, but I think it turned out ok! Honestly, I didn’t really like the way this looked when I first finished it – it seemed a bit chaotic with all the colors and piecing everywhere. But I’ve worn it a few times and have really grown to love it!

Same as with the black version, I underlined all the pieces with sheer cup lining (this time in white), except I did not underline the lace. I did stabilize the edge with a piece of navy powermesh selvedge. I think that looks and feels better than using clear elastic.

The back is pretty boring, although it does have purple topstitching 🙂 I just used firm powermesh for the back pieces, again, one layer.

And the flat shots:

The inside definitely doesn’t look as good as the black one. For one, my dark topstitching doesn’t work with the white interior (go figure?). I should have threaded two machines but I was feeling lazy (although I did at least put white in the bobbin when I sewed the band elastic). Further, I should have changed out that pink serging thread for white – or better, made that open seam the one right below the cups, as it would have been covered by the underwire casing and elastic. Whatever!

So those are the bras! Now let’s talk about meeeee!! I’ve already mentioned most of this stuff on Instagram, but I realize that a lot of y’all probably don’t use/follow me on Insta, and also, I can just go into more detail here!

First of all – as of March, I am no longer working for Elizabeth Suzann. Everything is fine between us – I just got a really good offer for another job that I couldn’t refuse (and unfortunately, I can’t do both because there are only so many hours in the day). More on that in a sec! I absolutely love love LOVED working for Elizabeth – her and her husband, Chris, are some of the best bosses I’ve ever had, and my coworkers were just fucking amazing. I had so much fun on the days that I worked there, and I never really felt like it was a job. Every day was different, and I liked challenging myself to do things faster while still being accurate. Of course, it helps to be somewhere where you feel appreciated and valued, which I certainly did! Liz is always looking for fabulous new seamstresses, by the way, so if you’re in Nashville and have some sewing skills, you should definitely apply! I can’t say enough good things about the company or the people who work there. I offered to help as a freelancer whenever they are overloaded with orders – so we’ll see, I just may be back from time to time 😉

So, hey, the new gig! I am now working at Craft South, which is an ADORABLE little crafty shop that Anna Maria Horner opened in Nashville about a year ago. We sell fabric, yarn, Janome sewing machines (which means I will definitely be buying a coverstitch at some point this year, hellz yea), embroidery and weaving supplies, handmade/locally made gifts, and just a general assortment of craft-based merchandise. My official title is “Education Coordinator,” which means I’ll be handling all the class stuff – scheduling and coordinating, planning, making samples, etc. I’m working alongside Anna and we have got some super awesome stuff in the plans for this summer! I’m also teaching Beginner Garment Basics classes – next up is this Breezy Caftan on 5/12 – and whatever else I can dream up, cos guys, I love teaching sewing 🙂 ALSO, I’ll be manning the registers and fabric cutting like a normal retail shop person on Tuesdays and Fridays – so if you’re in Nashville, stop by and say hi! Take a class! Support the local fabric store! You might even run into Anna Maria Horner herself, who is way cooler than I am 🙂

FINALLY, one more big change coming up – don’t laugh, but I’m moving! AGAIN! (and if this doesn’t surprise you – dude, get in line, literally everyone I’ve told this to replied with, “Yeah I was waiting for this to happen” haha) Honestly, I really love the house I live in and my living situation is totally ace (I’m in the middle of the woods with my best friend, so it’s like constant BFF night over here), but the reality is that I don’t like living so far from the city. If I could pick this house up and plop it back down into Nashville, I absolutely would… but that’s not how life works. My commute from Kingston Springs to Nashville is about 30 miles one way, which I’ve learned is absolutely killer for me. I hate it!! I miss being in biking distance of my job! I miss ordering takeout (lol jk I never order takeout or delivery but HELLO OPTIONS ARE NICE)! I miss having a 10 minute / 5 mile commute. These are things that are important to me. I’ve felt stuck here for a while now, because Nashville has gotten outrageously expensive now that everyone is moving here (btw – if you’re thinking about moving here, don’t. We’re full.). However, this new job has literally afforded me the opportunity to get out and back into the city. So I found an apartment in West Nashville (where I was before I moved out here, and also, my favorite area!) and I’m moving in mid-June! Yay! That means a new sewing room will eventually be in the works, too 🙂 I’m not sure how I’ll manage blog pictures since I don’t really like doing the tripod/timer thing in public, but eh, I’ll figure that out when I get to it. At any rate, if things get a little quiet here in June… that’s why. As a side note, I’m cleaning out my closets in anticipation for the downsize in housing, and I’ve listed a few of my handmades that I don’t wear on Etsy. Most have already sold, but there are 2 things still listed if you are interested – you can check out my shop here. Someone give these handmades a good home and the wear that they deserve!

And, in case you were wondering – only my cat is coming with me (cat is a deal-breaker!). The pigs actually belong to my roommate, so obviously they are staying here in the country 🙂

One last thing – it’s May, which means Me Made May ’16 is in full swing again! If you’re not familiar with Me Made May, it’s a month where you challenge yourself to wear handmades (every day, a few times a week, entire outfits – whatever works for you!). I have participated in the past (see: 2012, 2013, 2014), but I won’t be doing it this year. About 99% of my clothes are handmade at this point, and it’s pretty much Me Made Everyday. There’s not really a challenge involved for me to wear them, so it seems silly and almost a little show-offy to jump in with everyone else. Also, I hated doing the daily selfies 😛 But rest assured that I am still rocking the me-mades – today I am wearing my Ginger Jeggings, the Starwatch Watson bra, a handmade black tshirt (unblogged because, it’s a tshirt) and a striped hoodie (also unblogged. Man I’m behind on this).

Anyway, that’s about it for me! Have a picture of my favorite part of my (current) sewing room. I really love this space, but it’ll be fun to set up a new one 🙂

Tags: bra, completed, craft south, elizabeth suzann, lingerie, marlborough, orange lingerie, personal life

Comments 64 Comments
Categories completed projects - new

Completed: Black Lace Boylston Bra

11 Mar

Ooh la la, y’all!

Hands down, this is definitely the sexiest bra I have ever made. Although, to be fair, it’s kind of hard to steer away from sexy anything if it involves black lace amirite.

It’s been a couple of months since I made this thing, which means I am going to have to dig deep into the recesses of my brain to try to remember all the little construction tidbits. On the flip, however, it does mean that I’ve worn it a lot in that time and can seriously vouch for the fit and comfort factor.

I used the Boylston bra from Orange Lingerie as the base for this pattern. Having made this pattern several times before, I did not make any additional changes to the fit (other than my previous edits to the back band). I sewed a 30D, which is in line with the size I wear in RTW. The big changes I made were in terms of construction – namely, trying to figure out how to incorporate both foam cups and a lace outer, while retaining all those cool little scallops that make the bra so pretty. I think this rendition is pretty good, although there is definitely room for improvement in future versions. Always learning 🙂

Like I said, getting that form cup + scallops gave me a bit of a head scratch, so I took to some store-bought bra snooping to try to figure out how to make it work for this lil guy. It appears that most RTW bras have the foam cup and lace outer cup sewn separately, and then tacked together at the top in a few places. With this in mind, I finished the top edge of my foam cup with a simple 3 thread overlock (it’s not really imperative to do this, as the foam doesn’t unravel – but it does look nice!), and then simply laid the constructed lace cup on top and lined the innermost points of the scallops with the edge of the foam cup. Rather than tack it down, I actually stitched all the way across. The lace is super busy, so the stitching doesn’t show- but it’s very secure. For the remaining edges of the cup, I followed the pattern as instructed.

I also had to figure out how to do the straps, as the patterns calls for self-fabric straps with a little bit of strapping elastic at the back. I actually spoke with Norma (she of Orange Lingerie, and the mastermind behind these patterns) at length about this when I met with her in Boston, and while she gave me some really good advice on how to do the fabric straps with a scalloped edge – I ended up not having enough lace to cut them! Whomp whomp. Maybe for the next one. For this particular bra, I had to stick with regular elastic bra strapping. I sewed the underarm elastic as instructed, stopping right where I planned on adding the straps (as the pattern is written, you attach the fabric straps and then sew the underarm elastic all the way up. Since I had no fabric straps, I had to improvise!). When I trimmed the excess elastic, I made sure to keep intact scallops so things looked more intentional. The front of the straps are attached with the rings going through a tiny piece of elastic – again, something I snooped on existing bras. The back is attached the same way the pattern instructs.

To get the scallops along the bottom, I used the same method of flat attaching the elastic, instead of turning it back, as I did on my lace Watson bra. Since having finished this bra, Erin has published a wonderful post on how to make a lace frame bra, one method which gives a beautiful gothic arch along the bottom (instead of the straight band you see here). I am really excited to try that method!

I really love the lace I used for this bra! This is the second piece that was given to me by Tailor Made Shop, and if it looks familiar – it’s because I also have some in navy (which I made into a lace Watson bra). It looks like the shop is out of this stuff in black, but they do have navy, pink, purple and white 🙂

Because the lace is a bit lightweight, I underlined all the pieces. The bridge and frame have sheer cup lining for stability (mine is from Bra Maker’s Supply, but you better believe I am excited to restock from a US source haha!), while the band pieces are underlined with power mesh. I didn’t underline the cups, since there are foam cups and that’s pretty supportive enough 🙂

All elastics and notions are from my stash, which the exception of the scalloped bra strapping – which is also from Tailor Made Shop 🙂

Fit-wise, this is one my best yet! The bra is super comfortable, super supportive, and gives me a really nice shape (hell yeah my boobs look awesome in this thing). It’s not a push-up, but there is definitely some lift action going on in there. If you would like to see a picture of me wearing it, click here. This should go without saying, but, again, PLEASE do me a solid and don’t post this image all over social media 🙂 Posting strictly for science purposes.

My only complaint is the horizontal wrinkle along the bottom of the bridge. It only shows on the outside, when I’m wearing the bra, which leads me to believe it’s from excess lace fabric in the front (the inside stays smooth regardless). Ugh! It’s not a huge deal – the bra is still wearable and absolutely no on has noticed (or at least pointed out) the wrinkle, so I ain’t gonna let it bother me. But the next one will be wrinkle-free, hopefully 🙂

Ok, I think that wraps up about all the bra talk I have in me for today! 🙂 Happy Friday, y’all!

Tags: boylston bra, bra, completed, foam cup, lace, lingerie, orange lingerie, tailor made shop

Comments 43 Comments
Categories completed projects - new

Completed: Boylston Bras; Take 2 & 3

21 Aug

More bras this week! Yay!

Starting with the prettier one, even though I actually made it second. For both of these bras, I used the Boylston Bra pattern. Guys, I really really love this pattern. I love how it comes together, I love the pretty details (like the fabric strap!), I love that the fabric requirements are so easy to work with (very little fabric, very stable fabric, foam cups, etc), and I just love the shape it gives! It’s a very pretty bra and the pattern is so good. This polka dot bra was the result of a pretty good stash-bust, apart from the foam. Since this pattern is designed for firm woven fabrics – especially with the addition of the foam cups – that means you can make it out of pretty much anything. Sooo I’ve been going kind of crazy with my fabric scraps! I especially thought that this sweet polka dot rayon (the same fabric I used to make my Simplicity mock-wrap dress that I posted last week) would be extra adorable as a bra.

All I had to do was order foam – I had nude and black in stash (from Bra Maker’s Supply, because their stuff is the best). Unfortunately, the Sweet Cups store (the US version of Bra Maker’s Supply) didn’t have any white (see what I mean about limited selection? Wah!), and I wanted white. I bought it from this Etsy shop, which is apparently in the process of closing now 😦 I’m not really sure what “spacer foam” is, but it works pretty well for a bra. It’s a little stretchier than the stuff at Bra Maker’s Supply, and slightly thinner as well (it’s not as cushiony). I read somewhere that you can buy this by the yard at places like Spandex House in the Garment District, so I will probably stock up when I’m there in November. But even 1/4 yard is TONS of foam, especially if you are making teeny little bra cups like what I require hahaha. Heyo, silver lining!

Other than the foam, this whole project was a de-stash. All the elastics and underwire channeling are from the Garment District, I think, and the strapping is leftover from my red bra kit (there wasn’t enough elastic included to make full straps when I was using it to make a red bra, so I had to buy red strapping. But that’s fine because the amount they gave me is perfect for fabric straps! Yay!). I know the pattern doesn’t call for a bow in the center, but I like the bows! This particular bow was ripped off of a retired RTW bra. Ha!

Here’s the back. I used a firm white powermesh (also from the stash) for the back band. I like the mix of white and red elastics and trims. I’m getting better about mixing and matching my lingerie trims, I think.

Not much else to say about this one. Here are some detail shots:

UGH at those black dots in the cups! Those are my notch markings for assembling the cups – I used a ballpoint pin (I think I got that tip from Cloth Habit) to mark the notches, since you can’t really clip the notches and my usual fabric markers and chalk don’t really write well on foam. Except, I forgot that ballpoint pin is FOREVER and I somehow managed to mark both sides. So that’s pretty lame, but, whatever. Can’t do anything about it now except acknowledge the lesson and move on with my bra making!

If you’d like to see a photo of what the bra looks like on an actual person, click this link. I’m not embedding it into the post (or uploading it to Flickr for that matter, yeesh) to cut down on the number of people who see me in a bra, as well as spare any eyes that don’t want to see that sort of thing (um, hi mom! :)). But I acknowledge that it’s really hard to see how a bra fits if it’s not actually on a person – and my dressform doesn’t really fill it out correctly. And those floating ghost bra pics just don’t cut it (plus they are a pain to make haha!). So pleeease do me a solid and don’t post that photo around the internet or pin it on Pinterest or anything like that 🙂 Posting only for science purposes 🙂 Love y’all! OK, MOVING ON.

Here’s the other bra I made, using the same Boylston pattern. Nude bras are a SERIOUS hole in my summer wardrobe – er, lingerie drawer. I have a couple, but I always need more. I wear a lot of light/sheer colors in the hot weather! So I really need to make more flesh-colored bras to wear under my clothes, so I can rotate them and let them rest from time to time. This particular make is pretty boring and looks downright sickly on my dressform (don’t hold your breath about me modeling a shot of this one because, eeew), but let’s rejoice that I made it nonetheless! I know it doesn’t look very filled out on this dressform, but I promise it fits me just fine and the cups don’t wrinkle like that.

Another stash-busting bra, I used silk crepe scraps to make up the outside, and my beloved nude bra cup foam + nude power mesh for the innards. The silk crepe is the same stuff I used for the neck binding of this SJ sweater – which was given to me as a scrap bust, so it’s like, extra extra free. And as sickly as the color looks, it’s pretty close to my skin (did you not click that picture link? I mean. No one is complimenting my ~rosy glow~ over here hahaha). So it works quite well for what I need it to do!

I had someone ask me about the strap assembly – the fabric straps are made with a piece of fabric folded in half and then picot elastic attached to the outside edge to finish it. There is a little bit of elastic at the back, with rings and sliders. The fabric straps are pretty stable in their own right and work quite well, although these particular straps (and not any other Boylston bra I made, for some odd reason) are a tiny bit too long for me. I shortened the elastic as much as possible and they’re still a little more than what I need, so I really need to just dissemble the strap where the ring is attached and shorten the fabric strap by an inch or so. You know, at some point in my life. Maybe tomorrow.

Again, all the little bits and pieces that make up this bra were from my stash. The sliders and bow were taken off another retired RTW bra. The sliders don’t exactly match, but they “go” well enough.

Again with the perma-ballpoint marks! Argh! I made this bra before I made the dotted one – and cut them both at the same time. This was the bra I realized the error of my ways on, unfortunately. I also dyed that channeling, all by myself. I used coffee this time, which gives a much less yellow beige than tea does. It doesn’t quite match the rest of the beige of the bra, but it’s close enough for me.

I tried using the 3 point zigzag stitch for the bottom elastic of this bra. I don’t like the way it looks at all – it’s too busy, especially where it intersects with the underwire channeling. I much prefer a standard zigzag set a little wider (like what you see on the polka dot bra). Also, I know that the elastic is super wrinkled and bunchy looking when it’s flat, but it smooths out really nicely when I’m wearing it. That being said, I definitely pulled the elastic too taut when I was applying it – something I was able to fix with my next bra, the polka dot one. You really only need to stretch the elastic ever so slightly under the cups and at the bridge when applying it – mostly so it’ll turn to the wrong side more easily and look smooth. Not look like the hot mess I have going on here.

One of my favorite parts about this pattern is being able to add a cute little picot edge at the sides. I love the way it looks!

Ok, I think that’s it! I’ve got a few more ideas for this pattern, so I hope you’re not sick of seeing a million renditions of it just yet! Up next, I want to try making some lace versions – I have a couple of gorgeous pieces from the Tailor Made shop that I’ve been waaay too scared to use, but i think it’s time to bite the bullet and woman up a bit! I also want to experiment with changing the straps – maybe leaving off the fabric strap and using elastic (either removeable or sewn on) in it’s place. I wonder if this pattern would work as a strapless? Would it be as simple as smoothing down the top of the cup, adding some boning to the side seams and possibly rubber elastic at the top of the cup? What do you think?

As a side note, I wanted to share an update with my Made Up pledge. My first rendition of a swimsuit was a HOT MESS (not so much the pattern or the construction – more like, I wanted a string bikini and I absolutely hateeeee the way I look in them! Definitely should have done some sneaky try-before-you-DIY shopping for that one, it would have saved me a bit of headache), and I was all set to try pattern #2 when I realized that I don’t have enough fabric 😦 I made an emergency order for a piece of really cool swimsuit fabric, but it doesn’t appear to have shipped out yet. We leave 2 weeks from today, so hopefully it’ll get here soon!

Tags: boylston bra, bra, completed, handmade lingerie, lingerie, orange lingerie, polka dots, rayon, rayon challis, silk, silk crepe

Comments 55 Comments
Categories completed projects - new

Completed: Silk Leopard Print Boylston Bra

5 Aug

Man, I am SO far behind in terms of what I made vs actually posting it. This is from 2 weeks ago. Ain’t mad about it!

The pattern here is the Boylston bra, which is the newest pattern from Orange Lingerie. I think I mentioned this before, but I’ve been waiting for a hot minute for this pattern to debut – Norma showed me a photo of one of her samples when I met with her in Paris (man, that sounds so fancy! I wish I was that fancy irl haha) and I was super excited about the idea of making a bra with a woven fabric. Also, tiny prints. You need a tiny print so that it doesn’t get lost in these little pattern pieces. And isn’t everything tiny automatically twice the fun? Yes.

Another big selling point of this bra vs the Marlborough is that the Boylston has been designed to be made with foam cups (you can also make it without foam cups and just have a soft, lined bra, if that’s your jam!). At the time of my snooping, I wasn’t terribly interested in foam cups (I am now, though), but I loved the idea of a lined bra, again, made with a tiny print. Also, the balconette shape is new to me – I don’t think I’ve ever actually owned a bra with this silhouette because I’ve never found one that fit properly. So obviously it was time to try something new!

Since I’ve already made the Marlborough bra a number of times (one two three, etc etc), and I was pretty comfortable with the fit, I compared the pieces of the two patterns together to see if there were any similarities. Both the bridge and the back band on the Boylston and the Marlborough are almost exactly the same. The cradle is also pretty similar. Obviously the cups and straps are different, but I felt pretty confident that I could cut my usual size in the Boylston and not have any weird surprises. So I made my bra up in a 30D, same size as the Marlborough was for me. I also applied my Marlborough back band changes to the Boylston pattern – I figured if the bands were drafted the same, then they would probably need the same LT-alterations (mostly shifting the curve so that the straps hit the right spot, and extending it to be slightly longer. Which means technically this band isn’t a 30, but, whatever. It fits me now, that’s all that matters). The cup wrinkles you see on the dressform aren’t there in real life; she’s just a slightly different size than I am.

I tried to wait & hang around to see if anyone else made this pattern before I dove in, so that I could steal their ideas without having to figure things out on my own. But, y’alls is too slow for me! I waited a couple agonizing weeks and said, fuck it. Cut that sucker up, stitched her together, new bra by the end of the day. Yay!

I wanted to try something super duper fancy for this bra, so I made it out of silk! The outer is this leopard print silk charmeuse from Mood Fabrics, and it’s REALLY nice stuff! I used the shiny side facing out – normally, I prefer the matte side of silk, but the shiny side definitely looks more bra-like (and I’d guess will also wear better under clothing, since it’s ~slick~). For the cups, I did try out foam for the first time – and I’m a total convert. Bra foam RULES, you guys!! Making the little cups was really fun (and having little foam boobies floating around the sewing room is a total thrill, let me tell you) and they definitely make this bra look way more RTW than anything else I’ve ever made. I’ve hated foam bras for quite a while now – mostly because of that weird half-grapefruit shape that they all come in. My boobs definitely aren’t shaped like that, so they never fill out the bra correctly – there’s always a giant gape at the top half of the cup. What’s nice about this pattern is that the cup is seamed, so you get a more natural shape which in turn makes the foam cup fit better. I bought this foam from Sweet Cups Bra Supply (which is the US version of Bra Maker’s Supply – cheaper shipping, but the selection isn’t quite as extensive, wah) and I really like the way it feels, as well as how it sewed. One of those little foam pieces was plenty for this bra – I estimate that I have enough to cut at least 2 more bras, maybe 3. So it’s not terribly expensive, either.

While this bra pattern was designed to work with foam, the pattern isn’t actually drafted to be foam-friendly – you have to do that yourself (does that make sense? The stye works with foam, but the pattern needs a couple of tweaks for the best sewing results.). Part of my waiting around for someone else to make this pattern was that I could not figure out how to seam up the foam on the bra – wouldn’t the seam allowance be bulky? I did some lurking and found this make a foam cup bra series on Cloth Habit, which answered pretty much all of my foam questions. I retraced the cup pieces onto light plastic and removed the seam allowances, and followed Amy’s tips for sewing everything together and trimming down the foam within the seam allowances to reduce bulk. I’m really pleased with the results. I think this bra looks totally professional.

As with my other bras, I used firm powernet for the back band and lined the bridge with the same powernet. All the elastics and notions are from my stash (mostly from the Garment District, but I buy my underwires from the aforementioned Sweet Cups because I love their wires! In fact, I love everything I’ve bought from that site. Their quality is the best!). Interestingly, I had *exactly* enough of all the elastics I used – nothing more, nothing less. Dunno how that happened, but I won’t argue with it! The cups are lined with the foam, and thanks to the elastic and underwire channeling, the only seam you see is the side seam that connects the bridge to the band. I serged that seam with a 3 thread overlock; next bra I make, I might experiment with binding it or even adding a lightweight boning. So many options!

I worried about the straps getting stretched out of shape, since they’re silk and all (a double layer, but still). The edges are finished with elastic, though, so that helps them keep their shape. I’ve worn this bra a LOT since I finished it. I’m actually wearing it right now as I type this 😉 hahaha!

The only thing I will change for the next bra is that damn seam allowance at the top of the cups. Instead of following Amy’s advice and using 1/8″, I used the pattern’s 3/8″ and as a result, the foam is really bulky and there’s definitely a ridge at the top of my bra. Using a smaller seam allowance would have eliminated that. Oh well!

Here are the foam cups. Aren’t they adorable! They are sewn up with a basic zigzag stitch, the pieces butted together with no overlap. I’ve seen some people cover their foam cup seams, or use a satin stitch to piece them together – but I like the basic ol’ zigzag. It’s strong enough, not very noticeable, and super quick!

Final thoughts – this is by far the prettiest, best-fitting bra I have ever made. I think the shape is really beautiful and modern, but not Victoria’s Secret’s idea of modern (no big half-grapefuit foam cups, PLS). I don’t have any photos of me wearing this one, sorryyyyy, but I’ll make an attempt for the next one (as of this writing, I have 2 cut and ready to be sewn, so it’s safe to say that there will be more of these in my life!). I LOVE that the pattern is made for non-stretch fabrics, and thanks to the foam cup – you could make this bra out of almost anything. Which has definitely got me thinking hard and lurking into the depths of my fabric stash! The fabric straps are pretty, and bonus – they use less elastic than normal elastic straps (so, again, yay for using scraps!). I also think the cup piecing could lend itself to some gnarly colorblocking. We’ll see! I also wonder if this pattern could be converted to a strapless? The shape is pretty similar to the RTW strapless that I own; except the cups have less coverage on this one.

As far as how easy the pattern was to make – well, I definitely did not make it any easier on myself thanks to my fabric choice! Silk charmeuse is hard enough to deal with on a good day, but we are talking about teensy little pattern pieces here. A couple were cut off-grain and had to be recut. I didn’t have too much of a problem assembling and topstitching, but I’ve also made a few bras at this point so I’m pretty confident in those skills. The only construction part that was hard was getting the elastic around the underarm and up the strap. That curve was difficult to navigate. I don’t think this is a hard pattern, per se, but I don’t know if I’d make it my first bra pattern. Definitely not in silk charmeuse with foam cups, at any rate. Maybe start with the Watson or the Marlborough first 🙂 The instructions were good, pretty similar to the ones for the Marlborough. I did notice that Norma added grainlines to the pattern pieces, which indicate the stretch direction so cutting is easier. That was a MASSIVE help! I do wish there were more markings on the pieces themselves – mostly, top and bottom markings. I’m not really sure if my cups are upside-down or not, because there’s really no way to tell.

Ok, who else has bought this pattern and when are you gonna make it?! Guysss! I need to see more Boylston bras up in here, please and thank you!

Tags: bambi bra, boylston bra, bra, bra makers supply, bra making, completed, foam cup, lingerie, orange lingerie, sweet cups

Comments 56 Comments
Categories completed projects - new

Completed: Lace Marlborough Bras

1 Jul

Still on a lingerie kick here! Actually, these are old-ish makes – I finished both of these back in May. Whoops, sorry! Haha! I guess at least I can vouch for their wearability, since I’ve been wearing the hell out of these since I finished ’em!

I’ll start with the first one I finished, a white lace underwired bra. This is the Marlborough bra pattern from Orange Lingerie (spoiler: so is the other bra in this post). I’ve made this pattern quite a few times, but what’s different about these two bras here is that this is my first time venturing outside the world of pre-cut bra kits. I already mentioned this in my Starwatch Watson post, so here’s the Marlborough edition!

The white lace for this bra came from a new-to-me source – I have discovered a random fabric store in a REALLY random shopping center in Franklin, TN. I was actually heading into Aldi, prompted by the sweet siren song of cheap pineapples, when I noticed a sign 2 stores over that said “Fabric.” In the middle of a strip mall, no less. Turns out there actually is a quilting shop right there, called the Stitcher’s Garden (I don’t think they have a website). It’s like a quilting shop mixed with a thrift store – piles everywhere, products dating back to the 70s, and the prices are surprisingly cheap (especially considering the part of town we’re talking about here). The selection of quilting cottons available is staggering. I’m not one for buying (or sewing) quilting cottons, so unfortunately that was lost on me – but they did have a nice little selection of elastics and stretch laces! And several colors of stretch rib knit (which I will be back for, because, unf). This stretch lace was, I think, $1 a yard. It’s beautiful and great quality and it’s A DOLLAR A YARD. I bought 10 yards. I want more.

Anyway, I digress. It’s always exciting to discover a new fabric store, though!

Back to Marlborough. The white lace is way too stretchy to actually use with this pattern – the pattern calls for no more than 10% mechanical stretch, and we’re talking about some spandex shit with the lace here. Taking a cue from my lessons learned during the bra-making class that I took in January, I underlined all the pieces with white power mesh. This worked pretty well, although I think my mesh was still a touch too light (we used a firmer power mesh in the class, with great results), so next time I want to experiment with tricot lining instead (I actually have a package of the stuff that I bought from Bra Maker’s Supply and I haven’t even opened it yet). I did not underline the upper lace cup – I left that with the stretch lace stretchy (I know the pattern calls for rigid lace in the upper cup, but I really like the look/shape I get with stretch), and a bit of 1/4″ clear elastic at the top to stabilize it, as called for in the pattern (I’ve noticed my RTW lace bras don’t have this, so I am thinking about leaving it off for the next bra). The back band is simply one layer of the heavier power mesh.

All notions were procured from my stash. I couldn’t tell you where half of them came from – although I do know that the underwire channeling was from Pacific Trimming in NYC. They have giant rolls of that stuff for super cheap, and the quality is excellent. They only have white and black, but the white can be dyed. I didn’t have any white ribbon, so the bow is nude.

I made this bra because I wanted something to wear under my white/sheer clothing without show-through. I know that nude is actually a better color for that, but white was what I had on hand and I didn’t want to experiment with dying just yet. Of course, once I started trying to wear the bra – of course it showed through like CRAZY. Duh! I realized that it wasn’t going to get worn at all the way it was (if I’m gonna wear something that doesn’t require a nude bra, then I’m gonna wear a bra that’s a fun color because come on), so I knew it needed a good dye. I’d received a good tip on Instagram to dye the bra with tea for a nice beige-y color – brilliant! I steeped some very strong black tea (English Breakfast, if you must know), let it cool a bit and then dumped the whole bra in to soak for about 30 minutes.

The final color is something much closer to that of my skin. I know I’m pale, but I’m not literally white 😉 I was curious to see how well the tea-dye would hold up with a wash – and it’s actually stuck around! I wash my lingerie with Soak, which is nice and gentle and also doesn’t require rinsing (yay!). I figured if the color faded that I’d just re-dye it (I mean, it is just tea after all), but it’s actually not faded at all. Sweet!

The second bra for this post is my floral wild-card and Mood Sewing Network project for the month of June…

Oh yeah! I found this awesome Multicolored Tropical Lace fabric at Mood Fabrics and immediately knew it needed to be a bra. Isn’t it beautiful? It’s a nylon embroidered lace with a bright all-over floral pattern printed right on top. It also has a cool finished edge (unfortunately they were too abstract for me to include in this project, but it’s there!). There are a few different colorways of the lace, which meant I spent about a week agonizing over which one to get – blue/purple, red/green, blue/beige, and beige – but I settled on this multicolor as I liked the pink repeats with the white background.

I’ll be honest – I wasn’t sure how this was going to pan out until the very end (yeah, that was a bit agonizing!), but I think it worked out all right! I used the aforementioned multi colored floral lace for the body of the bra, and cut it according to the grainline on the pattern pieces (as I’ve mentioned, this pattern requires about 10% stretch in the fabric, which usually means cutting it on the bias for firm wovens. This lace had just enough mechanical stretch so that I could cut it according to the pattern grain). Since the lace has giant open holes throughout it, I underlined each piece with a layer of power mesh to add a little bit of opacity. The back band is cut on one layer of firm power mesh. The white lace upper cup is cut using the same stretch lace as from the first bra in this post, stabilized again with 1/4″ clear elastic along the top.

For the notions, I decided to go with all white so that the colors in the fabric would really sing. All notions were pulled from my giant stash – I think (think) the bottom scallop elastic came from Madalynne. I’ve been hoarding that stuff for ages because I think it’s really pretty, and this bra seemed like the perfect excuse to finally use it. Oh, and the rings/sliders and pink bow are rescued from an old bra destined for the trash 🙂

Sewing this bra was pretty easy, but dealing with the lace was harder than I thought it would be. Because there are such large open holes in the lace pattern, that meant that topstitching the tiny seams took some finesse. I don’t want to say it was necessarily hard, because it wasn’t, but it also wasn’t a walk in the park like my white lace bra was. There were always tiny little pieces of lace that wanted to stick up and poke out and make weird lumpy shapes. And you have to topstitch the seams, because they can’t be pressed (this is a poly lace). I actually wondered if I’d even be able to wear this bra under a fitted shirt, because the topstitched seams look preeeetty lumpy, but it looks fine. Of course, it’s WAY too bright to wear under a white shirt, but whatever. That’s what the nude bra is for, ha 🙂

Anyway, bra worked out all right in the end and I’m a happy camper 🙂 I really love the shape and the colors in the lace are sooo pretty! Yeah, that lace was $40/yard, but something like this only requires maybe 1/4 yard, so it’s a good excuse to splurge on the nicer fabric 🙂 Seeing this bra actually work out makes me excited to find more cool non-kit fabrics to make more Marlboroughs out of 😀

Speaking of cool fabrics for Orange Lingerie patterns – have y’all seen her newest pattern, the Boylston balconette? OH MAN. I saw sneakies of this when I met with Norma in Paris back in November, and I’ve been soo excited about it ever since. I just bought a copy over the weekend, as well as some lingerie foam, and I can’t wait to start playing around with it! Eep!

* Note: The multi-colored floral lace fabric was provided to me by Mood Fabrics in exchange for my contribution to the Mood Sewing Network. All other fabrics and notions were purchased by me. As always, all opinions are my own!

Tags: bra, completed, floral lace, lingerie, marlborough, Mood Fabrics, Mood Sewing Network, orange lingerie, stretch lace

Comments 34 Comments
Categories completed projects - new

Completed: More Bras!

23 Feb

You may have heard that the south was hit with a particularly bad ice storm last week. Nashville was coated with a few inches of solid ice, that kept melting in the sun and refreezing overnight, turning all our roads and interstates into some scary-ass ice rinks for the majority of the week. Since we’re not really equipped to deal with that kind of weather (the last time we had an ice storm anything like this was over 20 years ago – it normally just melts the next day and it’s not an issue), that means that most people spent the week stuck inside their house. And by “most people,” I’m specifically talking about myself. I gotta say – it was pretty nice to have nearly a whole snow week! I wasted the first day by being sick (wah), and the remainder of the days it was really hard to get my ass off the couch because our house is REALLY freaking cold (I’m wearing a fleece robe over my clothes and sitting by a space heater as I type this. I love my old house, but man, they are drafty!). I did want to take advantage of all the free time I had from being home for most of the week, so I made a couple of bras. Bra making is great for cold weather sewing, mostly because you don’t have to strip down often for fitting. Really, just once, and that’s when the bra is finished.

I made 2 bras, but I actually have 3 to show y’all. The first one is one that I finished at the end of 2014 (yay!); I’ve had the photos for ages but I never bothered to post it because it seemed like a pretty boring post on it’s own. For each of these bras, I used a fabric+findings kit to assemble them – so hopefully this will help those of y’all who are still trying to figure out what kit works best for which pattern.

Bra #1 is this sexy little red lace number. This is the Marlborough bra, and the fabric is from a kit from Bra Maker’s Supply (the lace is something I picked up in London; Bra Maker’s Supply doesn’t include lace with their kits). This is the second bra I have ever made, and while I did have a few learning curves with this one, I really learned a LOT.

I really love the kits from Bra Maker’s Supply – they are a good price (less than $30 USD) and the materials are pretty nice quality. I’m not super crazy about the fabric, but it looks nice when it’s sewn up (I like to use the side that isn’t shiny, so it looks less costume-y). The only thing I’ve had a problem with is that they don’t indicate what elastic is for what part of the bra – it’s kind of assumed that you already know. For this bra, I mixed up the lace edge elastic with the underarm elastic, whoops. So now the underarms are lacy, and the top of the lace… isn’t. I doubt any of y’all would have even noticed that if I hadn’t pointed it out, but, it is what it is. It’s not uncomfortable or itchy, at least.

I made this bra exactly the same way as I sewed my black Marlborough, except I left off the clear elastic and lining on the lace (I used the underarm elastic at the top of the lace, to stabilize it). I only made a couple minor fitting changes to the pattern, based on what Norma and I talked about while I was in Paris (scooping about 1/4″ off the bottom of the bridge and adding about 1/4″ to the edge of the upper cup, also moving the straps out about 1/2″). When I finished the bra, I put it on – and it was COMPLETELY unwearable. The back straps were so far apart, they were riding up the back of my armpits. Really really uncomfortable. So I threw the bra in the corner and ignored it for about 3 weeks while I debated what to do. The bra was already finished at this point – underwires inserted, hook and eye sewn in, everything – and I didn’t want to trash it after putting all that work and money into it. This here is the downside of bra making. You can’t really fit-as-you-go.

Spoiler alert: I fixed it and it’s now wearable. I had to unpick the entire back, but I made it work. What I ended up doing was unpicking all the stitching and elastic from the back band, all the way to the frame, and then removed the back band. I measured the pattern band against the band of my favorite bra, and redrew the back curve to match the RTW one. This ended up making the back band bigger as well – so I’m not sure the bra size anymore, since it’s bigger than the 30D I originally cut. Doesn’t matter, though, because whatever the size it is – it fits ME. Anyway, I recut the back pieces in power net and reattached them to the frame, pieced the elastic (since what was attached to the bra was now too short for the band – fortunately, the kits give you more than enough elastic so this was not an issue), and reattached the hook and eye. The bra now fits really well. The band is big enough – it was a smidge too tight before – and the straps are in the right spot. I’m really glad that I took the extra 2+ hours out to rip out and fix the bra, because now I have a wearable red bra!

Here it is on me. This the only floaty ghost bra picture you get in this post, fyi. And only because I did this one agessss ago, ha. You actually see a bit more nipple in real life, but I was feeling modest so I pushed them out of the way. You’re welcome, I guess.

This is the bra that I showed Maddie when I was in Philly for the bra making class. I wanted her to see my fitting changes and tell me if there was anything else I need to tweak. Thankfully, the bra looks pretty good – so I’ve got the go-ahead to keep cutting this size, with my new back band piece and all that.

Soooo, here’s the next Marlborough that I made over the snow week!

No fitting changes to this bra, just fabric changes (and a different kit). I really like that red bra, but I REALLY LOVE this one! I think it turned out sooo pretty! And, while I’m not the kind of person to sit here and wax poetic about my boobs or anything (I mean, they’re boobs, there’s nothing any more special about mine than, say, yours), this bra makes them look really really good. Gives them a nice lift and shape. I’m so happy with it!

I used one of the kits from Grey’s Fabric to make this one up (I don’t see it on the stock page anymore, but it was black and nude). These have the same duoplex fabric as the kits from Bra Maker’s Supply, but unlike BMS – they also include the lace, underwires, and enough strap elastic (you don’t get enough with Bra Maker’s Supply, fyi! Make sure you buy extra if you order from them). I did change out the ribbon decoration to a black one – and sewed a little rhinestone button in the middle, BECAUSE IT’S ADORABLE – but everything came with the kit. I like that.

The major difference between this bra and the red one is the lace – the red lace is very stable, so it doesn’t stretch. The black lace here is a stretch lace that I did not stabilize. That alone made the biggest difference in the fit.

I’m just including this picture because Amelia looks like a deer caught in headlights hahaha

I’m really happy that this lace had a scalloped edge, so I could use that in the bra. I think it’s really pretty! I stabilized the scalloped edge with a piece of clear elastic – this wasn’t included in the kit, but I have tons of it on hand, so not a big deal. All the findings are the same nude color; the only black is the lace and the power net (and the bow I made – I thought it looked better than the nude bow).

Now that I’m feeling pretty good about the fit, I’ve started experimenting with finishing the seams. I used a 3 thread overlock for this one – at the advice of all my favorite bra makers, basically. You just have to be careful with 1/4″ seams; you don’t want to accidentally cut too much off (I know you can disable the knife blade, but me, I like to live on the edge). Oh, and you can see the little nude bow that I didn’t use! Maybe for my next bra.

Finally, I also made another Watson bra!

I LOVE this one so much! I talked myself into buying that kit one day (I don’t know why, but I was convinced that I needed a green bra – like, who doesn’t need a green bra?); the nude/black kit was actually bought at the same time so I could get free shipping, ha. I used one of the lace Watson kits (the one I bought appears to be sold out, but this one is similar).

I admit – when I first received the kit, I was completely confused. The lace only has a minor amount of mechanical stretch – i.e., no spandex – and there was a TON of powermesh. I wasn’t sure if the bra would even fit, considering the blue Watson I made used a very stretchy material. I sat on this one for awhile because I wasn’t sure how to proceed, but I think I nailed it.

The cups and bridge are obviously cut from lace, with what little stretch there is going in the direction it’s supposed to. The bridge is also stabilized with the included lining from the kit. All the lace is lined with powermesh, and the back band is only power mesh (so it gets the stretch it needs). I’m really pleased to report that it fits very very well. The rigidity of the lace gives it quite a bit more support than the stretchier bra has, so that’s nice. Plus, it almost looks like a real piece of clothing now (I mean, not lingerie haha), with all the lace and shit. Now I’m wondering if this pattern would work with a bias-cut woven fabric for the cups and frame – that’s about the amount of stretch you get with this lace+mesh. Might be something to experiment with later!

All the trim is white; pretty much the only green is the mesh. You can see that I used the picot lace elastic for the upper cups on this one, as well as the underarms. This kit only came with one trim, instead of two. I finished all the seams with the 3 thread overlock, same size and everything as with my last one.

I took a tip from Maddie’s bra making class and used a new method to cut this sucker out. First I used Sulky Temporary Spray Adhesive (that links to the exact one I use; but any temporary spray adhesive suitable for crafting/sewing should work), then I used a teeny tiny rotary cutter to cut all the pieces (this isn’t the exact one I used, but it’s close enough – 28mm Olfa Rotary Cutter. I got it in the bra making class I took). The spray adhesive held everything together while I sewed it, which was extremely helpful – especially when basting the lining to the cradle fabric. No wrinkles there, yay!

Then I made the matching undies with the leftover! Didn’t realize the lace was supposed to be used for the front part (it’s in the project description now, but it wasn’t there when I bought it), so I just made the whole thing from powermesh. I used the wider elastic for the waist, and the decorative for the legs. These are okay; I need to practice more pulling the elastic because it’s not quite stretched enough. But it works well enough.

Anyway, that’s it! I love all these kit options for bras, because it saves me the headache of trying to source all the matching supplies myself (plus, I’m such a sucker for a good kit. Especially when it comes in it’s own box and everything is individually bagged; makes me so happy!). Now that I’ve used a few of the kits and gotten a general idea of what elastic to use in which part (and what it looks like, etc), I feel a lot more confident to buy all the supplies myself and not have to rely on a kit. That being said, I love the kits and I am looking forward to some new color options for sure!

Out of all the kits, I’m not sure if I have a favorite. I love the Bra Maker’s Supply ones because they’re really good and basic – everything is dyed the same color and it matches perfectly. The Grey’s Fabric kits are nice because they have a nice range of colors and they’re not just one solid color, plus, I like the pretty strap elastic and picot edged stuff too. I really love the hardware that comes with the kits from Blackbird fabrics, however, I think I prefer the more rigid lace + powermesh for a Watson, as opposed to the super stretchy millskin. Just a personal preference! The millskin almost feels like a swimsuit. If you’re trying to decide which kit to buy from where, I think it really boils down to your color preferences and how much the shipping will cost. There are lots of options, and they’re all really great!

Ok, I think I’ve done enough bra and boob talking for today! What’s your favorite bra out of these 3? Are you ready to start making your own now? Is there another kit option I should be looking into? I want to try the Merckwaerdigh kits next, I really love the color and pattern options!

Tags: bewbs, bikini, boobs, booooooobs, bra, cloth habit, completed, handmade lingerie, lingerie, marlborough, orange lingerie, underwear, undies, watson bra

Comments 36 Comments
Categories Uncategorized

Completed: The Marlborough Bra

19 Nov

Omg, you guys! I made a bra!

And not only that – it actually fits! It’s comfortable! And it’s PRETTY!

Besides the little bralettes I played around with a couple months ago (which totally don’t count), this is actually the first bra I have ever made. The VERY first – it started as a wearable muslin, that is quite super duper wearable. In fact – wearing it as I type this! Can you tell how tickled I am with this turn of events? SUPER pleased with myself right now.

Ok, lemme back up a little bit and talk about the not-so-harrowing process of bra-making. The pattern I used to make this gorgeous gal is the Marlborough Bra from Orange Lingerie. I can’t even tell you how happy I am about the release of this pattern – after reading up on Norma’s (of Orange Lingerie) book Demystifying Bra Fitting and Construction after she sent me a copy a couple of months ago (as well as lurking hard on the beautiful custom lingerie she makes), I knew the pattern itself would be amazing, both in terms of fit and instruction, not to mention overall style. Spoiler: the pattern absolutely did not disappoint.

While I’ve had this pattern in my stash for a little while now, it took me a couple of months to muster up the energy to actually make it up. There is a LOT of info in the pattern – as well as on the Orange Lingerie blog – about choosing fabrics and notions. Orange Lingerie’s book, Demystifying Bra Fitting and Construction, is also a great resource, with whole chapters devoted to all the fine details. I ended up chatting Norma up via email for advice on what fabrics to buy, and she directed me to Bra Makers Supply (psst – the US version is Sweet Cups Bra Supply. It confused me at first, too, but the shipping is a bit more reasonable for those of us in America. You can click over to the US site from the main site, on the top right hand corner). They actually sell full bra kits that include everything you need to make a bra – the fabric & powernet, all the elastics and notions, even a tiny bow 🙂 The Marlborough bra was designed to be made of a fabric that has no stretch, and specifically, designed for the fabric that comes in these kits. So I bought two kits right away. There are ways to manipulate any fabric to get it to work for this pattern (which is outlined here), but for my first bra, I wanted to Keep It Simple, Stupid.

A few of things I want to point out about these kits:
– They don’t come with underwires. You have to buy those separately. I bought them from the same site to save on shipping. If you don’t know your underwire size (I did not), get your best guesstimate based on your RTW size/measurements and buy the next size up or down. I bought both the 34 & the 36. I ended up using the size 34 for this bra.
– The kits also do not come with lace. You’ll need to supply that on your own. I was all set to make this bra with my red kit, until I realized I didn’t have any red lace! So I’ll be looking for red lace in London. In the meantime, the black lace leftover from my Georgia dress worked nicely for this bra 🙂
– While the kits do come with elastic strapping, be warned that it is NOT enough for this pattern (Maddie warned me to this, and I didn’t listen to her at all because I’m an asshole. Then I had to go back and buy more strapping. Except I bought it from a different supplier, and it was a MILLIMETER more wide than what I needed, so it’s kind of hard to slide the sliders and rings. Argh!). I think the kits are cut for bras with fabric straps. Anyway, you’ll want to buy more strapping – either from Bra Maker’s Supply, or another vendor entirely. You’ll need at least a yard and a half, and the kits come with something crazy like 15″.
– Be mindful of what size kit you are buying. My bra cups are preeeeetty small, so I bought the small kits since I wanted to save on shipping as they weigh a tiny bit less. That fabric yardage worked out great, however, I didn’t think about the fact that my size really needs a 3 hook hook and eye! The small only comes with the 2 hook size. It’s not the end of the world (my bra is perfectly supportive with the 2 hooks), but you will need to recut the back band to fit the smaller size if that’s the case. Just fyi!
– I’ll also mention that the fabric that came in the kits, at first glance, looked really cheesy and cheap. It was REALLY shiny and my first impression was that it looked like a crappy Halloween costume. Ha! For one, you can use either side of the fabric (my shiny side is on the inside, so my bra is more matte). Also, it’ll look better when it’s sewn up. Just looking at a flat, shiny piece of fabric… well, it’s gonna look shitty no matter what. So there’s that.
– Speaking of shipping, Bra Maker’s Supply did refund me about half my shipping costs after they sent my order out. That kind of ruled!

Based on my measurements and Norma’s email advice, I decided to make the size 30D. I typically wear a size 28DD or 30D in RTW, so pretty much the same. I actually compared the pattern pieces to my favorite lace RTW bra to see if they were similar, and they were almost exactly the same. Fit-wise, things are very close. The upper cups on my handmade bra are a little more snug than the RTW one, but the RTW one also has stretch lace for the upper cup (whereas on the Marlborough, the lace is rigid), so that might have something to do with it.

The Marlborough Bra pattern is very well-written and covers every step of the process, which is super helpful if you’re like me and have never sewn a bra before. There are tips on where to add topstitching, how to sew in the underwire channels perfectly, what pieces to baste on first so they don’t slip when you zigzag them on. In itself, the pattern is absolutely sufficient for making a bra. However, I did find it incredibly helpful to have Norma’s book at my side during the process. Whenever I found a step in the pattern confusing (more so confusing because this was new and alien territory to me – and less because the instructions were lacking), the book answered it right away. It’s also helpful because there are actual photos of the steps in the book, so if the diagrams aren’t doing it for you, you have back-up. Of course, I don’t think it’s necessary to have the book to make a bra – but I was happy to have it on hand.

The one part about the pattern that I didn’t like was that it wasn’t super clear on what pattern pieces to cut from what fabric. This stalled me for a couple of hours, actually – there’s some general info in the pattern, but I’m the kind of person who needs clear-cut specifics. After googling as many Marlborough bras as I could find, pouring over Norma’s book, and referencing Maddie’s bra-making guide from her Sewing Party class, here’s what I came up with:
– The cups, bridge and frame are cut from the main fabric from my kit. I cut them according to the grainline, since there is a slight stretch in the fabric.
– The straps were cut out of powermesh, with the direction of greatest stretch (DOGS) running around my body.
– Since my lace is stretchy, I lined it with more of my black fabric so it would be rigid (as the pattern calls for)
– I lined the bridge with a second layer of the same black main fabric

The kits also don’t tell you which elastic is for what. I wish I’d bothered to figure that out BEFORE I started sewing – as there is actually a cute little 1/4″ scalloped/lace trim for the upper cup. Instead, I used clear elastic on the inside of my cups. Womp womp. At any rate, I figured out the rest of the elastics pretty easily – just measure them and check the widths against the pattern notions list. One thing to keep in mind, again, is that the small kit has narrower trims. Since my size is a D, I should have had the large kit (and wider elastics, including straps). I did not, but the bra turned out fine. I feel supported.

Oh, and I did not finish my seams. I felt that focusing on construction and fit was more important for this go. I do want to explore seam finishing for future bras, though!

All this aside, I had a LOT of fun putting this thing together! Omg! Once the cups were assembled, it really started to look like a bra and that’s when things got exciting. I got to usse all kinds of cool zigzag stitches (these are all covered in the pattern instructions) and play around with lace and trims. So fun! One tip I will give is to be careful with those 1/4″ seam allowances – if you’re not used to sewing them (I’m not), you might have issues with the machine trying to eat the edge of your fabric, especially if you’re sewing something delicate. I have found that by *very* gently pulling the thread tails away from you when you start each seam, it will guide the fabric along until your feed dogs have a good grip and you’re past the danger of your machine chomping a hole in your fabric. Just be sure to hold both thread tails and don’t force it.

Also, that favorite RTW bra that looks a lot like this one? I kept it on hand while I was sewing my Marlborough, so I could refer to it when needed. That was pretty helpful, especially when I needed to visualize how the elastic was supposed to look.

The only downside to bramaking is, unfortunately, it’s very hard to tell if the bra will fit until it’s mostly finished. Of course, you can mock-up with crappy elastics and temporary underwires, but because the fabric is so essential to determining fit, the mock-up needs to be of the same stuff (aka, not cheap muslin, or whatever). So it’s a bit of a gamble. I’m pretty thrilled that mine fits so well – although it can definitely use a little bit of tweaking before it’s perfect. I’ll let y’all know how that goes! In the meantime, here’s a somewhat awkward photo of how this one fits on me:

Sorry that I had to totally erase my body (I’m not terribly shy, but, this is a public blog, after all), but this should give you an ok idea of how it looks. I’m actually pretty impressed! It’s supportive, it’s comfortable, and it’s SO pretty! Looks like a bra you’d buy in a store. Except better, because I made it 😛 As far as wearing it under clothes – it’s about the same as any seamed/lace bra. Not completely smooth (personally, that doesn’t bother me), but not super lumpy. Since this fabric is kind of thick, I’ve noticed that nipping isn’t too much of a problem, either.

I’m looking forward to making more of these! Once I tweak the fit, I want to try some different kits – I see that Grey’s Fabric has some beautiful kits, and I’ve also been eyeballing the ones from Hooks & Wires. Not to mention the famous Merckwaerdigh kits, the holy grail of all that is beautiful about handmade lingerie. I want to buy all white everything and try my hand at dying the whole set to match (there’s a short chapter on dying in Demystifying Bra Fitting and Construction, yes!). I want to explore trying new fabrics (I’m thinking this might be the PERFECT excuse to splurge on a tiny piece of Liberty fabric while I’m in London!), laces and trims, and mixing and matching for some cray combinations. I want to make matching underwear (yep). I also want to make a push-up bra, but that may require a different pattern 🙂 Making this one bra just has me itching to sew more! It’s SO satisfying! Have I convinced you to make a bra yet? Have I? Huh? 🙂

Bloggy Disclaimer: Norma sent me a copy of Demystifying Bra Fitting and Construction as a gift. I did buy the pattern and kits with my own money, just in case that wasn’t clear!

Ooh, speaking of London – a couple more things –
For those who have asked – there will be a meet-up on Saturday the 22nd! If you emailed me previously, you should have received the details of the meet-up a couple of days ago. Anyone else who wants to join (whether you didn’t contact me, or are just hearing about it now 🙂 ) – we will be meeting at Goldhawk Road at 10:00 AM. We will congregate outside the tube stop until 10 minutes after the hour, then we will be moving on to shop! If you would like to join the meet-up – please, come! You don’t have to email me to get an ~invite~ (nor do you need to have a blog to hang with us). If you can’t make it at 10:00 AM but would still like to try to find us later, you can either email me and I will give you my number (I plan on getting a SIM while I’m there, so it’ll be local!) so you can text me, or just tweet me. Come to buy fabric, come to eat and drink later – whatever works! This is an open invite 🙂

Also, the blog will probably be pretty quiet while I’m gone. I want to really enjoy my vacation and not be sitting at a computer all day! I will have access to the web and will respond to emails and comments as I can (and maybe squeeze a post in if I have downtime waiting at the airport or something), but I don’t have anything autoscheduled and I’m not bringing in guest posters or anything like that 🙂 I’m taking a break and I’ll be back in December! 🙂 In the meantime, if you want to lurk my trip – you can follow my Instagram and/or Twitter.

See y’all laterz!! ♥

Tags: bewbs, boobs, booooooobs, bra, bra making, completed, handmade lingerie, lingerie, marlborough, orange lingerie, satin, underlining