Tag Archives: cloth habit

Completed: Lemon Print Watson Bra

11 Apr

Gah, I love fruit-themed novelty prints, especially when they are in a fruit that I actually like to eat (as I’ve mentioned before: pineapples, yes, cherries, not really. ha). Lemons have always been one of those things that I always gravitate toward – both in my palate (if it includes lemon – whether it’s a dish or a drink – I will definitely order it) and on my fabric. I haven’t had much luck finding lemon fabric in the past, but 2017 must be trying to make up for starting out so shitty because now I have TWO lemon yardages in my stash!

Well, now only one… but I’ll sew that one up soon, too. I promise.

Lemon Watson Bra

Anyway, here’s the first one – a beautiful lemon-print cotton knit! It’s another piece of fabric that I picked up while I was in Finch Knitting + Sewing Studio back in February. I found it creeping behind another pile of knits, and there was barely any yardage left on the bolt (maybe 1 yard, tops). This was one of those few instances where I threw the fabric in my pile without thinking twice about what I’d actually make with it. The lemon print is very similar to this Kate Spade lemon purse (that I also own, because, duh. Lemons), except that the fabric includes splashes of turquoise, whereas the purse only has bits of green. I didn’t think it was possible to improve on the Kate Spade print, but I acknowledge now that I stand corrected.

Anyway, I spent some time (aka about 10 minutes of thinking and 2 minutes of googling) deciding what to make with my fabric, and I decided on…. a cardigan! πŸ™‚ This knit is a thicker cotton interlock knit – it’s not really the weight that I like my tshirts to be, and the print is too summery to make into a sweatshirt. I thought the cardigan would be a lovely way to wear this print throughout the summer, especially since those things are mandatory here as people really love abusing the a/c. I cut my cardigan pieces, fused my interfacing, and got ready to assemble everything.

Lemon Watson Bra

If you’re sitting here thinking, “Bitch, that’s not a cardigan,” YES I KNOW. I ended up having a grand epiphany somewhere around the time that I was pressing under the seam allowances of the pockets. I was feeling sad that I didn’t have more than scraps of the lemon print left over (generally, I am pleased when I buy exactly enough fabric, but this particular case was a time for mourning and self-reflection), and suddenly wondered if I could squeeze a pair of panties out of the leftovers. I pulled the pieces out of my scrap bin – and, nope, the scraps were too small. But you know what? Bras don’t use big pieces of fabric…

Lemon Watson Bra

Obviously, I stopped everything I was doing and immediately started making a bra instead.

Lemon Watson Bra

I used the Watson Bra & Bikini pattern from Cloth Habit, as it’s designed to be made with stretch knits. Due to my fabric restraints, I could only squeeze out the short-framed version – which I like better, anyway, as I think the longline would be too much. I made my regular size, which is a 30D.

Lemon Watson Bra

Lemon Watson Bra

For the notions, I raided the hell out of my stash. For some reason, I have all these coordinating yellow notions – powermesh, strapping, picot elastic – even though I look terrible in yellow. The hook and eye and rings and sliders were harvested from an old bra, and I made the turquoise bow with a scrap of ribbon. I used cream-colored thread to topstitch because I didn’t want it to compete with all the lemons.

Lemon Watson Bra

Lemon Watson Bra

Lemon Watson Bra

The entire bra is lined with lightweight yellow powermesh. Lining is not totally necessary with this pattern (I have made unlined versions before), but I wasn’t sure what the recovery was like on this knit, since it’s 100% cotton. So I added the powermesh as another layer of support. As you can see, I serged the inside seams with turquoise serger thread – it seemed like a good idea at the time, but I’m not really crazy at the effect. Rather than being a cute tie-in with the outside turquoise, it kind of just looks like I didn’t have matching thread. Oh well, whatever, inside of the bra.

My last short frame Watson bra isn’t exactly the most supportive thing I own – it’s fine for it’s purposes (TBH, I don’t need a lot of support and have lately just not been wearing a bra at all LOL FREEEEEEDOM), but I didn’t want the same thing to happen with this bra. The main problem with the coral bra is that the bridge is too stretchy – so it doesn’t hold the cups in place. For this bra, I used sheer cup lining (from my stash, but Tailor Made Shop sells it!) on the bridge – and then covered it with the powermesh – to keep that area completely stable. Powermesh isn’t stable enough on it’s own – not even with two layers of stretch going in opposite directions (which was the case with the coral bra), but the sheer cup lining definitely worked an this bra is much more supportive!

FYI, I sewed the entire bra on my sewing machine – other than the serged parts, which was just to finish the edges (so they look nice, they’re not exactly going to unravel). I used a straight stitch for construction, and a zigzag for attaching the elastic. I have done this with all my other knit bras, and even my swimsuits, and haven’t had any issues with the stitches breaking. Definitely use a ballpoint needle, though!

Watson Panties

And, if you were curious… I did find a way to squeeze out some matching underwear hahaha!

Watson Panties<

My scraps were way too tiny to cut even the front piece out (even before I cut out the bra pieces), so I chopped up my pattern and added some ~style lines~ to incorporate a little bit of the print in an otherwise plain pair. FYI, this is the matching panty pattern that comes with the Watson set. The yellow fabric is actually merino wool – yeah, I know, merino seems like it might be weird for underwear, but I totally googled that shit and Smartwool definitely sells merino underwear soooo if it’s good enough for Smartwool, I reckon it’s also good enough for me + my butt!

The crotch lining is organic cotton from my stash, and the elastics are also from my stash. I experimented with using turquoise elastic on this pair – it’s pretty cute!

Then I went crazy and made a bunch of other pairs of panties:

Watson Panties

Used a bamboo jerseyΒ for this one.

Watson Panties

Cotton interlock, leftover from this dress.

Watson Panties

More merino (I will be honest – I went on a huge merino kick at this point and now I have a full set of long underwear for next winter haha). I believe this merino is originally from The Fabric Store – it’s the lighter weight.

Watson Panties

Rayon knit – a leftover from this top (that stretch lace at the top is also from Finch!)

I seriously do not care to make underwear, but it’s kind of a necessary evil – anything I buy in shops just doesn’t fit right, gives me perma-wedgie pretty much all day and it’s very uncomfortable. After assessing my underwear drawer, I realized that I need the elastic around the legs to keep my underwear in place – that’s the only kind that doesn’t ride up on me. It’s been increasingly difficult to find RTW undies that have this, which means I gotta make them. I made several pairs because I wanted to see how the fabrics wear over the course of the day, and if they bag and stretch out. So far, the cotton interlock, rayon knit, and merino wool are the best – but they are all pretty dang comfortable.

Watson Set

And now I have 2 pairs of undies that match my new bra πŸ˜€

Lemon Watson Bra

That’s all for now! Next (aka when I take the photos), I’ll show you the cardigan I also made with this fabric!

Completed: Starwatch Watson Lingerie Set

24 Jun

I pretty much never name my makes (if I did that, I would have looooong run out of clever names at the rate I sew haha), but every now and then, I get a hankerin’ to christen something with a silly name. Which is why this new lingerie set is called Starwatch.

Because, like, I’m gonna watch the stars and shit while I wear this. Don’t call it Stargaze, that makes way too much sense.

Starwatch Watson Bra & Bikini

Starwatch is made using the Watson & Bikini brief pattern from Cloth Habit. Every time I make or wear this pattern, I immediately start thinking of more versions to create. I know some people like a little (or a lot) of variety in their lingerie, but I feel pretty content with the two patterns I’m churning out these days – Watson for comfy happy lounge days (or starwatching lololol) and Marlborough for slightly-nicer-rack-but-still-pretty-comfy days. Actually, I’d love to throw a (non foam cup) strapless bra pattern in that arsenal. Any suggestions, my wise lingerie readers?

Starwatch Watson Bra & Bikini

This is my third iteration of this pattern, so no changes to the sizing or fit. This was also my FIRST time making Watson where I didn’t have the hand-holding to comes with buying a pre-cut kit. Eep! I love those damn kits (the two I’ve used – both with great success – are from Blackbird Fabrics and Grey’s Fabrics) and I highly recommend them if you are just getting into lingerie sewing and don’t know where to start with sourcing your fabric or supplies. It’s really nice to have someone else take the guesswork out of all that, so you can focus on the actual sewing part. I also just really love having something packaged up in a box, it just makes me so happy! That being said, you are paying a finder’s fee for someone to source those supplies – and while I don’t think the kits are necessarily expensive (depending on where you buy your bras, the kits might be cheaper. They are for me, anyway!), I also have a huuuuge ol’ stash of lingerie notions that I’ve been hoarding collecting for a few months now, and it was time to woman up and start actually using it.

Starwatch Watson & Bikini

Obviously the fabric is the ~star~ of this ensemble (u see what I did there?). That amazing sparkly goodness was a gift from my beautiful and sassy girl Lola, who brought it from me all the way from the Garment District when she was with me in Philly for Maddie’s Bra-Making class. It’s a gorgeous stretch mesh with glittery stars all over it – and yes, in case you were wondering, I have washed this thing several times and I still get glitter everywhere when I wear it. Yay, party in my pants! It has a fantastic 2 way stretch – which was a bit of a gamble with Watson, as that requires a 4 way stretch, but it thankfully worked out ok.

Starwatch Watson Bra & Bikini

Since the fabric is pretty sheer, I underlined all the pieces with a soft black power mesh, to give a little extra support and a layer of opacity. The cradle is also lined with tricot lining fabric (left over from my Blackbird kit, woohoo!). The back band is 2 layers of power mesh running in opposite directions (normally, I like one layer of power mesh – but this stuff is really lightweight and SUPER stretchy and I was concerned about the fit, so I doubled up). Everything was sewn on my regular sewing machine and the seams were finished with a 3 thread overlock.

All the notions are from my stash – I didn’t have to buy anything new to finish this bra. Yay! I honestly couldn’t tell you where any of this stuff came from – I look for lingerie elastics every time I go fabric shopping, especially in the Garment District, so there’s a good chance that most of this is from NY. I really love the tiny scalloped elastic around the bra cups, I wish I could remember where that came from because I’d totally buy more!

Starwatch Watson Bra & Bikini

Starwatch Watson Bra & Bikini

Starwatch Watson Bra & Bikini

Starwatch Watson Bra & Bikini

Starwatch Watson Bra & Bikini

To complete my Starwatch set, I also made matching panties. Not much to say about these – I underlined the star mesh at the front (again, with power net) and used a single layer of power net for the back. The cotton crotch lining came from my stash.

Starwatch Watson Bra & Bikini

Starwatch Watson Bra & Bikini

Really happy with this set, and glad I was able to put that beautiful glittery star mesh to AWESOME use! (and I still have loooots more, so maybe more glittery underwear is in my future πŸ˜‰ heh)

Starwatch Watson Bra & Bikini

Completed: More Bras!

23 Feb

You may have heard that the south was hit with a particularly bad ice storm last week. Nashville was coated with a few inches of solid ice, that kept melting in the sun and refreezing overnight, turning all our roads and interstates into some scary-ass ice rinks for the majority of the week. Since we’re not really equipped to deal with that kind of weather (the last time we had an ice storm anything like this was over 20 years ago – it normally just melts the next day and it’s not an issue), that means that most people spent the week stuck inside their house. And by “most people,” I’m specifically talking about myself. I gotta say – it was pretty nice to have nearly a whole snow week! I wasted the first day by being sick (wah), and the remainder of the days it was really hard to get my ass off the couch because our house is REALLY freaking cold (I’m wearing a fleece robe over my clothes and sitting by a space heater as I type this. I love my old house, but man, they are drafty!). I did want to take advantage of all the free time I had from being home for most of the week, so I made a couple of bras. Bra making is great for cold weather sewing, mostly because you don’t have to strip down often for fitting. Really, just once, and that’s when the bra is finished.

I made 2 bras, but I actually have 3 to show y’all. The first one is one that I finished at the end of 2014 (yay!); I’ve had the photos for ages but I never bothered to post it because it seemed like a pretty boring post on it’s own. For each of these bras, I used a fabric+findings kit to assemble them – so hopefully this will help those of y’all who are still trying to figure out what kit works best for which pattern.

Red Marlborough Bra

Bra #1 is this sexy little red lace number. This is the Marlborough bra, and the fabric is from a kit from Bra Maker’s Supply (the lace is something I picked up in London; Bra Maker’s Supply doesn’t include lace with their kits). This is the second bra I have ever made, and while I did have a few learning curves with this one, I really learned a LOT.

Red Marlborough Bra

Red Marlborough Bra

I really love the kits from Bra Maker’s Supply – they are a good price (less than $30 USD) and the materials are pretty nice quality. I’m not super crazy about the fabric, but it looks nice when it’s sewn up (I like to use the side that isn’t shiny, so it looks less costume-y). The only thing I’ve had a problem with is that they don’t indicate what elastic is for what part of the bra – it’s kind of assumed that you already know. For this bra, I mixed up the lace edge elastic with the underarm elastic, whoops. So now the underarms are lacy, and the top of the lace… isn’t. I doubt any of y’all would have even noticed that if I hadn’t pointed it out, but, it is what it is. It’s not uncomfortable or itchy, at least.

I made this bra exactly the same way as I sewed my black Marlborough, except I left off the clear elastic and lining on the lace (I used the underarm elastic at the top of the lace, to stabilize it). I only made a couple minor fitting changes to the pattern, based on what Norma and I talked about while I was in Paris (scooping about 1/4″ off the bottom of the bridge and adding about 1/4″ to the edge of the upper cup, also moving the straps out about 1/2″). When I finished the bra, I put it on – and it was COMPLETELY unwearable. The back straps were so far apart, they were riding up the back of my armpits. Really really uncomfortable. So I threw the bra in the corner and ignored it for about 3 weeks while I debated what to do. The bra was already finished at this point – underwires inserted, hook and eye sewn in, everything – and I didn’t want to trash it after putting all that work and money into it. This here is the downside of bra making. You can’t really fit-as-you-go.

Spoiler alert: I fixed it and it’s now wearable. I had to unpick the entire back, but I made it work. What I ended up doing was unpicking all the stitching and elastic from the back band, all the way to the frame, and then removed the back band. I measured the pattern band against the band of my favorite bra, and redrew the back curve to match the RTW one. This ended up making the back band bigger as well – so I’m not sure the bra size anymore, since it’s bigger than the 30D I originally cut. Doesn’t matter, though, because whatever the size it is – it fits ME. Anyway, I recut the back pieces in power net and reattached them to the frame, pieced the elastic (since what was attached to the bra was now too short for the band – fortunately, the kits give you more than enough elastic so this was not an issue), and reattached the hook and eye. The bra now fits really well. The band is big enough – it was a smidge too tight before – and the straps are in the right spot. I’m really glad that I took the extra 2+ hours out to rip out and fix the bra, because now I have a wearable red bra!

Red Marlborough Bra

Here it is on me. This the only floaty ghost bra picture you get in this post, fyi. And only because I did this one agessss ago, ha. You actually see a bit more nipple in real life, but I was feeling modest so I pushed them out of the way. You’re welcome, I guess.

This is the bra that I showed Maddie when I was in Philly for the bra making class. I wanted her to see my fitting changes and tell me if there was anything else I need to tweak. Thankfully, the bra looks pretty good – so I’ve got the go-ahead to keep cutting this size, with my new back band piece and all that.

Soooo, here’s the next Marlborough that I made over the snow week!

Black and nude Marlborough Bra

No fitting changes to this bra, just fabric changes (and a different kit). I really like that red bra, but I REALLY LOVE this one! I think it turned out sooo pretty! And, while I’m not the kind of person to sit here and wax poetic about my boobs or anything (I mean, they’re boobs, there’s nothing any more special about mine than, say, yours), this bra makes them look really really good. Gives them a nice lift and shape. I’m so happy with it!

Black and nude Marlborough Bra

I used one of the kits from Grey’s Fabric to make this one up (I don’t see it on the stock page anymore, but it was black and nude). These have the same duoplex fabric as the kits from Bra Maker’s Supply, but unlike BMS – they also include the lace, underwires, and enough strap elastic (you don’t get enough with Bra Maker’s Supply, fyi! Make sure you buy extra if you order from them). I did change out the ribbon decoration to a black one – and sewed a little rhinestone button in the middle, BECAUSE IT’S ADORABLE – but everything came with the kit. I like that.

Black and nude Marlborough Bra

The major difference between this bra and the red one is the lace – the red lace is very stable, so it doesn’t stretch. The black lace here is a stretch lace that I did not stabilize. That alone made the biggest difference in the fit.

Black and nude Marlborough Bra

I’m just including this picture because Amelia looks like a deer caught in headlights hahaha

Black and nude Marlborough Bra

I’m really happy that this lace had a scalloped edge, so I could use that in the bra. I think it’s really pretty! I stabilized the scalloped edge with a piece of clear elastic – this wasn’t included in the kit, but I have tons of it on hand, so not a big deal. All the findings are the same nude color; the only black is the lace and the power net (and the bow I made – I thought it looked better than the nude bow).

Black and nude Marlborough Bra

Black and nude Marlborough Bra

Now that I’m feeling pretty good about the fit, I’ve started experimenting with finishing the seams. I used a 3 thread overlock for this one – at the advice of all my favorite bra makers, basically. You just have to be careful with 1/4″ seams; you don’t want to accidentally cut too much off (I know you can disable the knife blade, but me, I like to live on the edge). Oh, and you can see the little nude bow that I didn’t use! Maybe for my next bra.

Finally, I also made another Watson bra!

Green and White Watson Bra

I LOVE this one so much! I talked myself into buying that kit one day (I don’t know why, but I was convinced that I needed a green bra – like, who doesn’t need a green bra?); the nude/black kit was actually bought at the same time so I could get free shipping, ha. I used one of the lace Watson kits (the one I bought appears to be sold out, but this one is similar).

Green and White Watson Bra

I admit – when I first received the kit, I was completely confused. The lace only has a minor amount of mechanical stretch – i.e., no spandex – and there was a TON of powermesh. I wasn’t sure if the bra would even fit, considering the blue Watson I made used a very stretchy material. I sat on this one for awhile because I wasn’t sure how to proceed, but I think I nailed it.

The cups and bridge are obviously cut from lace, with what little stretch there is going in the direction it’s supposed to. The bridge is also stabilized with the included lining from the kit. All the lace is lined with powermesh, and the back band is only power mesh (so it gets the stretch it needs). I’m really pleased to report that it fits very very well. The rigidity of the lace gives it quite a bit more support than the stretchier bra has, so that’s nice. Plus, it almost looks like a real piece of clothing now (I mean, not lingerie haha), with all the lace and shit. Now I’m wondering if this pattern would work with a bias-cut woven fabric for the cups and frame – that’s about the amount of stretch you get with this lace+mesh. Might be something to experiment with later!

Green and White Watson Bra

All the trim is white; pretty much the only green is the mesh. You can see that I used the picot lace elastic for the upper cups on this one, as well as the underarms. This kit only came with one trim, instead of two. I finished all the seams with the 3 thread overlock, same size and everything as with my last one.

Green and White Watson Bra

Green and White Watson Bra

I took a tip from Maddie’s bra making class and used a new method to cut this sucker out. First I used Sulky Temporary Spray Adhesive (that links to the exact one I use; but any temporary spray adhesive suitable for crafting/sewing should work), then I used a teeny tiny rotary cutter to cut all the pieces (this isn’t the exact one I used, but it’s close enough – 28mm Olfa Rotary Cutter. I got it in the bra making class I took). The spray adhesive held everything together while I sewed it, which was extremely helpful – especially when basting the lining to the cradle fabric. No wrinkles there, yay!

Green and White Watson Bra

Then I made the matching undies with the leftover! Didn’t realize the lace was supposed to be used for the front part (it’s in the project description now, but it wasn’t there when I bought it), so I just made the whole thing from powermesh. I used the wider elastic for the waist, and the decorative for the legs. These are okay; I need to practice more pulling the elastic because it’s not quite stretched enough. But it works well enough.

Anyway, that’s it! I love all these kit options for bras, because it saves me the headache of trying to source all the matching supplies myself (plus, I’m such a sucker for a good kit. Especially when it comes in it’s own box and everything is individually bagged; makes me so happy!). Now that I’ve used a few of the kits and gotten a general idea of what elastic to use in which part (and what it looks like, etc), I feel a lot more confident to buy all the supplies myself and not have to rely on a kit. That being said, I love the kits and I am looking forward to some new color options for sure!

Out of all the kits, I’m not sure if I have a favorite. I love the Bra Maker’s Supply ones because they’re really good and basic – everything is dyed the same color and it matches perfectly. The Grey’s Fabric kits are nice because they have a nice range of colors and they’re not just one solid color, plus, I like the pretty strap elastic and picot edged stuff too. I really love the hardware that comes with the kits from Blackbird fabrics, however, I think I prefer the more rigid lace + powermesh for a Watson, as opposed to the super stretchy millskin. Just a personal preference! The millskin almost feels like a swimsuit. If you’re trying to decide which kit to buy from where, I think it really boils down to your color preferences and how much the shipping will cost. There are lots of options, and they’re all really great!

Ok, I think I’ve done enough bra and boob talking for today! What’s your favorite bra out of these 3? Are you ready to start making your own now? Is there another kit option I should be looking into? I want to try the Merckwaerdigh kits next, I really love the color and pattern options!

Completed: The Watson Bra & Bikini Set

19 Jan

Hey look! I made another bra! And matching undies!!

Watson Bra

I’m loving my Marlborough bras so so much (yes, plural. I actually have two now, but I’ll save #2 for another post – this post is all about Watson), but I was really intrigued by the new Watson Bra pattern from Cloth Habit. Instead of a low movement fabric, this baby is sewn up in a fabric with lots of stretch. The cups are higher and more modest and there is no underwire. What really got my attention was the longline option, as well as the included bikini bottom pattern. SHUT UP AND TAKE MY MONEY!

Watson Bra

Since I’m still pretty new to this whole new world of lingerie, I let the pattern hold my hand when choosing a size and following the instructions. I measured to a 30D (to recap, in case there is anyone new here, I usually wear a 28DD), which fits pretty spot-on. Which is good, because other than hold the little cups up to my boobs while I was sewing them – I wasn’t able to actually try the thing on until I was completely finished with it. Talk about a bummer if that hadn’t worked out! Thankfully, the fit is pretty good. One cup has a tiny bit of sideboob action going on – but that breast is also slightly bigger, so I’m at the point now where I’m trying to decide if it’s worth tweaking the fit for a really custom bra. I’m pretty happy with the fit of the band – it’s nice and tight, like I like it, but it’s also very comfortable.

Watson Bra

The pattern has you cut the cups and cradle in a stretch fabric, the band in power mesh, and then the cradle is lined with a non-stretch to stabilize. Lining that section was obviously a little difficult for me – and I ended up getting quite a few folds as a result. Wah. For my next make, I am going to try fusing my stabilizer to see if that helps. It’s not the end of the world with these folds – but of course I’m always looking to improve.

Watson Bra

The bra includes standard bra hardware – hooks and eyes, adjustable straps, and decorative elastic. I do like that about the pattern, because it makes it look a lot less like some kind of soft training bra that a pre-teen would wear, and more like… a cute bra without underwires, I guess.

Watson Bra

Because of the needed stretch fabric, this bra doesn’t require the same sort of fitting that a structured bra would command (such as the Marlborough). It’s very soft and forgiving. The pattern is rated as being pretty easy and a great way to introduce beginners to bra-making. That being said – while I didn’t find the bra necessarily difficult to make, I do think that the Marlborough was easier to sew! Mostly because that lycra was stretching and sliding all over the place, and getting the cups in just so required quite a bit of precision. Still, it only took me a couple of hours to make, so that should count for something.

The instructions are pretty good! I might be biased – because I’ve already made two bras, I have my copy of Demystifying Bra Fitting and Construction on stand-by, and I’ve had enough bra-making conversations to know at least a little of what I’m talking about – but I found them very easy to follow along with. One part that was missing was determining strap length, but it’s my understanding that the pattern was updated with directions on how to do this (I personally just cut two 18″ straps. Worked perfectly! They are adjustable, after all). There were a few minor parts of the pattern that I changed based on preference – such as trimming the excess fabric before topstitching the elastic to the wrong side – but what’s included with the pattern is great as-is. There’s a lot of helpful info for choosing fabrics and trims, and tips for stitch settings when choosing your zigzag stitch. Also, there is currently an entire Watson Bra sewalong happening at Cloth Habit right now, so there’s that if you need even MORE hand-holding!

Watson Bra

Here’s an inside shot. As you can see, I did not finish my seams – just left ’em raw. It seems to work fine for my other bras, anyway. In the future, I’d love to learn how to properly finish my seams – or even line the whole thing – but I really want to nail down fit and technique before I start going too far down the deep end.

Watson Bra

Watson Bra

Rather than try to source all the materials and notions myself, I decided to splurge on a Watson kit from Blackbird Fabrics. The kit includes everything you need – 4 way stretch lycra, matching powermesh, elastics and trims, metal strap rings and sliders (stupidly, that was my favorite part haha. THEY LOOK SO GOOD), even the aforementioned cradle stabilizer and cotton knit for the crotch lining (for the undies, obviously). There’s enough in the kit to make both the bra and the matching bikini, and you can choose if you want a kit for the standard band or the longline. Since my boobs run on the small side, I’d reckon I could probably make 2 or even 3 bras with how much fabric I have left over (and maybe even a little bit of trim!). This color set is sapphire blue with black trims – and it’s soo beautiful! I can’t wait to see what other color combos Caroline comes up with.

Watson Bra

Watson Bra

Here’s the matching underwear – sorry it looks so unimpressive haha. I cut the XS based on my hip measurement (I was very apprehensive about this, as I normally wear a small), and the fit is pretty good. I think the butt area needs… something. Maybe I didn’t stretch the elastic enough. I feel like it makes my butt look flat, but Landon tells me I’m being ridiculous. Either way, they’re pretty comfy. I wore them all day yesterday and didn’t get a wedgie, which is awesome haha.

Since these posts are somewhat useless to me without a live model wearing the goods (if you want THAT, go holler at Heather Lou), here’s another floating bra photo for your consideration:

Watson Bra

For a non-underwired bra, it’s surprisingly supportive! I also wore this all day yesterday (with the matching bikini, bc, duh), and it’s really really comfortable. Way more comfortable than those Bambi bras I made. And it’s REALLY cute on – I am thinking that with a couple minor tweaks to the strapping and back hook, this would make a fabulous bathing suit pattern. I just need to figure out how to stabilize that cradle – it has to stay rigid, and I think the stuff I’m using isn’t really water-friendly (and definitely wouldn’t hold up in chlorine or salt water). Any suggestions or ideas?

Also, it’s not lost on me that I would consider making a bathing suit from this pattern, but can’t bear to show my skin with the bra in this blog post. Oh well.

Watson Bra

Watson Bra

Bra making is SO MUCH FUN, you guys! Good thing that happens to be a hole in my wardrobe, because I really love making them and I definitely want to do more! I’m really looking forward to the Bra Making Workshop in Philly next weekend – I have sooo much to learn, and I know Maddie is going to be an amazing teacher!