swimwear | LLADYBIRD

Tag Archives: swimwear

Completed: The Burdastyle Alison Swimsuit

Oh hells yes it’s time for another swimsuit. SWIMSUITS FOREVERRRRR.

I actually finished this a couple weeks ago, but I’m just now getting around to posting it. Whoops! This is swimsuit #2 of my summer swim gear (if you missed #1, you can see it here). Not that my old swimsuits needed to be replaced (I have three in addition to what I’ve made this year – one two three – yep, all my swimsuits are handmade at this point. Livin’ the dream!), but they’re REALLY fun to make! Can’t stop, won’t stop.

In fact, I have a third one already cut. No idea when I’ll get to that one, but its my American Flag Bikini Fit for a Beer Commerical, soooo hopefully sooner than later, ha. That is the suit that will be necessary for lazy days floating down the river.

So anyway, let’s talk about the swimsuit at hand. This particular goody is the Alison swimsuit from Burdastyle. This is I think maybe the second Burdastyle pattern I’ve ever sewn (the first was a Bombshell dress – which I don’t know if that *really* counts, because I followed an online course to make it so I wasn’t at the mercy of the instructions). I know they’re kind of a rite of passage for a lot of us sewers who thrive on the internet, but I’ve never been a huge fan of PDFs (hate taping them, hate storing them, bleeech) and I’ve heard horror stories about the ones that come out of Burdastyle. Most of the patterns don’t include seam allowances, and pretty much everybody complains about the instructions, or lack thereof. I’ve done pretty well with getting the looks I want from patterns that don’t have these issues, so skipping the BS (lol that abbreviation) hasn’t been a huge issue. Until I saw this swimsuit, anyway, and realized that I was gonna have to woman up and make shit happen.

Alison is a cute little retro-inspired one piece swimsuit, with a halter neck, gathered bust section, and a healthy bit of butt coverage. While this would be a REALLY cute style for pretty much all sizes and shapes, it unfortunately only comes in sizes S, M & L. I would guess it probably wouldn’t be too difficult to grade up another size or two – the few pieces in the pattern are all pretty simple – but I’d definitely make a mock-up first if you decide to go that route. I’m actually between sizes according to the size chart, so I just traced a line right between the Small and Medium and used that as my ~custom Lauren size~. Worked out pretty well, I think!

While I did not make any fit alterations to this pattern – there are a LOT of reviews that the body of the suit is really really short. I’m pretty petite and everything fits quite well, both length and width wise, which is good because I didn’t see those reviews until after I’d cut out the suit. Also, if you’re thinking about making this pattern – the seam allowances ARE included! Praise the Lord!

The instructions, on the other hand. Woof.

In all honesty, this almost ended up being The Swimsuit That Never Was, because the instructions are pretty confusing and hard to decipher! When I first downloaded the pattern, I noticed that there were a couple pages of instructions as well as some photos. I thought that was pretty awesome and I felt confident that this pattern would not live up to the Burdastyle tales of caution (especially since, like I said, it was fancy enough to have the seam allowances included). THIS WAS ALL A LIE. The instructions don’t make a lick of sense, at least not from what I could tell, and there aren’t any notches or markings to help you assemble the pieces together (which can sometimes save a shitty set of instructions). I spent a lot of time pin-basting pieces together, re-opening the PDF instructions and zooming in on pictures, reading the complaint comments on the Burdastyle site (had I read those first, I probably wouldn’t have even attempted this shit, tbh) and feeling sorry for myself for wasting a perfectly good piece of black swimsuit lycra.

Fortunately, a bit of googling around led me to this blog post with instruction clarification, as well as a list of the steps needed to actually put together the damn swimsuit. Of course, as of this writing (you know, a whole 2 weeks later), it appears that the post has been taken down so unfortunately that’s not really gonna help anyone. And being as how I made of this suit flying by the seat of my pants, I don’t really remember the specific steps needed to actually finish the damn thing. SORRY, I’M LIKE THE MOST UNHELPFUL BLOGGER EVER GAH. To be fair, the only really confusing part for me was the gathered bodice – because of the lack of pattern markings, I couldn’t figure out which way to fold it or where to sew my gathering stitches. Once I figured that out (it gets folded in half vertically, fyi – so it perfectly fits in the front suit scoop without being stretched), the rest of the suit was pretty easy to figure out. If you’ve sewn a swimsuit before and understand how to insert the elastic and all that, then you can probably figure this one out.

The black swimsuit lycra I used is old from my stash. I also lined the entire suit, except for the gathered bodice (which is self-lined by folding back one big piece of lycra after gathering). I was able to squish some swimsuit-friendly cups in the bodice before closing it up – this was as easy as trying the suit on before sewing the lining closed, positioning the cups, and then zigzagging them into place. The original pattern back strap is supposed to tie closed, but I don’t like having big lumps on my back sooo I just cut it as one piece and connected to both sides of the back. I wish I’d had the foresight to position the strap so that it doesn’t cross over the back binding and instead goes under it, but, eh, hindsight is 20/20 and at least I know for next time. The halter closes with a swimsuit hook, rather than tying because, again, don’t like having big lumps on my back.

Here are some flat/inside shots. I would have loved to have a hook that wasn’t bright white, but white was what I had in my stash so I made do with (not that you can even really see it when I’m wearing it, anyway). The lining I’m especially proud of – I was able to origami the whole thing so that the only exposed seams are the side seams up by the bust. Everything else is encased within the lining, yay! The leg holes are finished with swimsuit elastic and topstitched with a zigzag stitch.

ANYWAY, all construction issues aside – the pattern itself is pretty all right, and I’m happy with how it eventually turned out! I’ve always wanted a black retro-style bathing suit, so I can lay on the beach with my fancy adult beverage and floppy sun hat and feel like a Classy Lady, and I feel like this suit really fits that image to a T (me in the suit, now that’s another discussion for another day, ha!). I can’t wait to try my suits out at the beach this weekend. This suit feels pretty secure and like it won’t have any wardrobe malfunctions, but I always get a little nervous the first time I wear a handmade swimsuit out. You never know what’s going to decide to disintegrate once it hits the water and leave you nakey on the beach. Not that that’s EVER happened to me (or anyone I know, for that matter), but I have a healthy fear nonetheless haha.

In other news – it’s my birthday today! Yay!! I’m celebrating the dirty 30 this year, and I’m pretty happy to finally be able to say good-bye to my 20s. My early 20s were a total shitshow, my mid-20s were basically me rebelling against myself, and my late 20s have been spent cleaning up the mess I left in my own wake. I feel pretty good about this new decade and I’ll be celebrating it good and proper with my BFF when we’re in Peru next month! (have I been talking about Peru too much? Whatever, dudes, I’ve been planning this trip for a year! Sorry, not sorry! ahhahaahaha!).

Hope y’all have a lovely weekend! I’m beach-bound as of tomorrow morning, and I cannot WAIT.

Tags: alison, Alison swimsuit, bathing suit, burda style, burdastyle, completed, lycra, swim, swimsuit, swimwear

Comments 110 Comments
Categories completed projects - new

Completed: The Watson Bikini

11 May

I don’t know about where y’all are, but swimsuit season is BASICALLY upon us over here. Sure, they haven’t opened the pools – yet (that always happens on Memorial Day weekend, coincidentally right around my birthday as well. Pool parties every year for this kid!) – but it’s only a matter of time. Plus, I want to be ready when the water is warm – and not be scrambling to finish something the night before I hit the pool. Last-minute sewing is for people who work well under pressure. Which is not me.

So, anyway, I made a bikini! Yeah!!!

If this pattern looks familiar, it’s because I’ve made it before (not to mention it’s made some ROUNDS ’round the internet). It’s not a swimsuit pattern, per se – it’s actually a lingerie pattern. This here is the Watson Bra & Bikini pattern from Cloth Habit, modified into the swimsuit you see here. And yes, I realize that these pictures basically mean y’all are seeing me in lingerie. Whatever.

I have made this pattern before a couple of times (see one and two), so I knew I was good with the fit and I had strong feelings that this pattern would work equally well as swimwear with a few modifications. It was just a matter of finding a good swimwear lycra and figuring out how to stabilize that cradle in a way that wouldn’t deteriorate in chlorine and salt water.

Since I’ve gone into detail about the making of this pattern before, I won’t talk too much about the sizing or construction outside of making it into swimwear. I sewed my regular size – the 30D – and the fit was good except a did have a bit of gaping right between the side of the cup and the underarm. I think it has more to do with my elastic application – it might not have been stretched enough – but it was on both sides so I dunno. It may have been due to the stretch of my fabric, but the rest of the top fits great and the 4 way stretch is similar to the millskin I used for my first Watson. Anyway, I fixed it by taking in a dart and topstitching it down (at this point, the swimsuit was complete so there was nooo way I was unpicking all that shit haha). Not the most elegant solution, but the print is super busy so you can’t really see it, plus it’s right at my armpit. If anyone is looking and notices that shit, we’ve got bigger problems on our hands.

Other than that, the fit was good! I add a little bit of extra to the bottoms – about 1/2″ extended out from the back for more butt coverage, and about 1/2″ extended at the top to make them slightly higher. They’re still a little cheeky, but I think it’s pretty cute 🙂

Like I said, there were a couple of things that needed to be addressed in order to convert this into proper swimwear. For one, I knew it needed lining (maybe you wear unlined swimsuits, but I don’t!). I cut an extra of every piece out of swimsuit lining, and was able to origami it so that there aren’t any raw edges, except where the cups meet the band. Couldn’t figure that one out, so I just serged the seam. I also needed to change out aaaall that elastic to be swimsuit elastic- the picot and lace edges elastics that you use in lingerie are beautiful, but they aren’t made to hold up to salt water and chlorine (not to mention, they totally make that shit look like a bra). This was easy – I used braided swimsuit elastic and attached it opposite of how you attach lingerie elastic. Meaning, you sew the first swipe on the inside of the garment (I used my serger, but you can zigzag this), and then fold it one more time and zigzag topstitch. I did this everywhere except at the top of the cups, where I sewed it as you normally would for a bra (hadn’t thought that far ahead, whoops).

The strapping at the back band also totally stumped me for about a month. In the pattern, the top of the back band is finished with strapping that extends to go over your shoulders. It’s beautiful, but it’s not really good for swimwear (again, can’t stand up to the elements/chemicals, and – again, looks like lingerie). Of course, you can just finish the top edge with elastic the same way you finish all the other edges – but I liked the look of the strapping, plus, I have a feeling it’s sewn that way to help with the fit. After a bit of thought, I decided to do elastic covered straps and apply them the same way that the strapping is done on a regular bra. I used Ada Spragg’s tutorial on making elastic swimsuit straps (GIRL THANK YOU SO MUCH FOR THIS SHIT), and they turned out pretty nice! I left off the adjustable sliders since the elastic was so thick, but I did keep the little O-rings at the top.

The only downside is that I wasn’t quite precise with my seam allowances, so one strap has a tendency to twist (I’m pretty sure that’s from the elastic inside trying to roll up). It’s annoying, but not enough to make me unpick and start over. We’ll see how I feel after I get back from the beach 😛

Another thing that needed to be addressed was changing out the hook and eye for something that looks, you know, not like a bra. I used a swimsuit hook and eye – I know it doesn’t match, but it’s all I had on hand and anyway, you can’t really see it when it’s on – and just adjusted the back to fit the hook. I did this after the swimsuit was assembled, but before I attached the straps. There’s a tutorial on how to do this over at Cloth Habit, it’s for a bra, but same concept. For the opposite side, I just folded over the edge and sewed it down to make a tunnel for the hook to go through. Easy!

Finally, I had to figure out a way to stabilize the cradle while still making this thing hold up in water. For most lingerie patterns, this might not be a problem – but with this particular pattern, the cradle (the part of the band that attaches to the cups) needs to be stabilized so it does not stretch. The pattern has you use lightweight tricot, but I wasn’t sure if that would deteriorate over time. Instead, I cut two pieces of heavy powermesh running in opposite directions, and stacked them on top of each other with the swimsuit lycra on top and the lining on the bottom. Powermesh is water-friendly (well, so I’ve been told!) and it does a pretty good job of keeping everything stable.

The rest of the bikini was as straightforward as making lingerie. All pieces are cut from swimsuit lyrcra and swimsuit lining (other than the powermesh to stablize the cradle), and I included lots of zigzag topstitching to give it a sporty look.

In case you were wondering, my swimsuit lycra is from Spandex House in NYC. I bought it while I was in the Garment District in March. My lining is also from Spandex House, and the elastics I used are from Joann’s. I think the bra rings came off an old bra, and I don’t remember where the swimsuit hook is from. Other than using the serger to attach the elastic, I sewed everything on my sewing machine. Even with me stopping and researching and scratching my head, this shit only took a couple of hours to make. And just like that – I’m ready for the beach! Yay!

Oh, and how ’bout that AWESOME necklace I’m wearing?? I can’t take credit for choosing that – its from Rocksbox, which is a new online service where you rent 3 pieces of jewelry every month, chosen for you by a stylist. You can swap out the jewelry as much as you like during the month, and any pieces you buy are discounted. I’ve been trying it for about a month and it’s really fun – and definitely got me wearing jewelry that I otherwise neverrrr would have picked up. I was given a couple of months free by the company to try it out, but I’m seriously thinking of maintaining the account afterwards because I like this shit waaaay more than I thought I would! It’s only $19 a month, the shipping is free both ways, and I’ve received (and bought :I) some really cool pieces! So there’s that. Anyway, bringing this up now because you can use the code lladybirdxoxo and try your first month of Rocksbox for freeeeee. Who doesn’t like free, amirite? Also, SHINY.

Can’t wait to try this bad boy out in the water when we go to the beach in a couple of weeks! Also bonus for having a suit that no one else will be wearing (I used to buy aaaall my suits at Target. Do you know how many Target swimsuits run up and down Santa Rosa Beach? Do you know how many of those said swimsuits look better on the other person than they do on me? The shame.). I have tons more of this lycra – the minimum cut was 1 yard and you really only need like 1/4 yard to make a bikini – so I’m already trying to justify having a fleet of geometric swimsuits. We’ll see!

Tags: bathing suit, bikini, completed, geometric, knit fabric, knits, lycra, rocksbox, swim, swimsuit, swimwear, watson bra

Comments 61 Comments
Categories completed projects - new

Completed: The Soma Swimsuit, V2

6 Jun

I’m back again with my second Soma Swimsuit!

Aaaaaand, omg you guys, this is my favorite of the two. Definitely my favorite out of all the swimsuits I’ve made, possibly my favorite swimsuit EVER. Seriously! I really really love it!

Cheeky butt and all 😉

For version 2, I decided to up the ante and try it in a cool striped fabric – I’ve had this striped swimsuit fabric since 2013; I bought it at Spandex House (or World?) in NYC, along with a nude lining. I’ve always wanted a navy and white striped bikini, and I could not have found a better pattern to make this fabric up in. Although, I still have more that I could potentially make more bikinis with – a yard of swimsuit fabric goes a LONG way. Forreal, I had to recut the bodice on this swimsuit after an error in construction, and I still have sooo much left over. Yay for swimsuits!

There are tons of ways you could play with the stripes on these pattern pieces – I drew out a few croquis and sketched some stripe variations, which led me to decide that horizontal stripes with a vertical center looked the best (to me, anyway). I also think it would be cool to cut the triangle out of a solid fabric – possibly even the bottoms be solid as well – but I didn’t have any solid navy, so I went with full stripes.

Also, the stripes give my boobs x-ray eyes, which is kinda cool in and of itself.

I’m very pleased with how the stripes match up on the sides! To get a good match, I cut the bottoms on one layer (they’re supposed to be on the fold, which means you will need to retrace your pattern pieces so they are a full piece) and cut all the pieces for the cups before cutting the back band. After I assembled the entire front of the swimsuit, I then used the stripes as a guide for cutting the back band, to ensure that everything matched up.

While my first Soma was sewn entirely by following the directions, I did intentionally veer a little off course with this one. The pattern has you use plain elastic to construct both the top and the bottom – it is folded over and topstitched down, so it is essentially hidden once you put the suit on. I had this cool decorative elastic that I’ve been hoarding since 2013 (bought it on the same trip, from Pacific Trimming), and I was DETERMINED to use it. Katie suggested that I sew the elastic to the right side with the decorative edge facing down (i.e., the straight edge is matched with the raw edge of the suit), and then flip everything to the inside so the decorative edge peeks out and topstitch down. That’s exactly what I did, and I think it worked out quite nicely if I do say so myself!

I did this for both the top and the bottoms.

Another thing I wanted to add to the swimsuit was bra cups – as I’ve said before, I’m not a fan of the beach nip. While this suit is lined, one layer just doesn’t cut it for me, so I experimented with my options. My first suit did attempt bra cups, but it ended up a fail. I’m sure there’s a way to get them in there, but you’d have to change the order of construction – this suit is sewn so the lining and swim fabric are attached at the center bust seam, which means you can’t exactly cram a bra cup in there. After some thought and lurking those torn-up swimsuits, I threw out the failed bodice and started over. Ultimately, I decided to just cut multiple layers of lining for the bra cups and use that as a sort of padding – I think there are a total of 4 layers of lining on the bra cups (3 for padding, one for the outer layer), plus the actual swimsuit fabric. By doing this, I was able to follow the instructions as written, I just had a little more bulk to deal with 🙂 Trimming the bulk down and then topstitching made everything lie nice and smooth. And yes, in case you’re curious – the padding did pay off! Woohoo!

Again, for sizing, I went with the XXS. I’m actually surprised at how well this fits my ribcage – my underbust is 28″, so stuff tends to be waaaay too big right there. This swimsuit has a nice, snug fit, which helps keep it in place while you’re swimming. I did pull my elastic a bit more taut than instructed in the pattern – I don’t want any gaping on the beach, thankyouverymuch – but as far as adjusting the circumference of the longline, I didn’t have to do anything. Also, fyi, as per the last swimsuit – this was sewn almost entirely on my sewing machine. Wooho!!

Here are some close-ups!

A couple things I will mention if you plan on making this with decorative elastic: for one, definitely trim those seam allowances before you attach it. The hidden elastic that the the instructions call for is fine for the 3/8″ seam allowance, but decorative elastic needs a much smaller seam allowance (I think this is 1/4″), which means you get overhang if you don’t trim. I figured this out after making the bottoms, which you can see the excess (I did catch it and remember to trim for the top, which you can see a couple pictures down). Not a big deal, but definitely worth mentioning.

Also, see where the elastic is broken at the leg? It’s actually not broken – it connects in a full circle – but it sure looks like it. I should have cut the elastic to include a full repeat of the decorative part, and then overlapped by at least one scallop just to ensure that there are no broken parts. Oh well! Learn from my mistakes, guys.

Like the first suit, this one also calls for bra strapping for the straps. Since I didn’t have any on hand (this was before I discovered the white at Joann, which still would not have worked for this particular project), I improvised by using plain elastic and topstitching my decorative elastic right on top. I used two rows of straight stitching since they don’t need to stretch that much.

I did change one small order of construction when doing the bodice – the way the pattern is written has an exposed edge at the center triangle. I figured out how to burrito roll the fabric (similar to how one attaches a yoke to a button-down, with all seams hidden) so all my seams are enclosed. It was a little finicky but it certainly paid off! I haven’t seen the updated instructions on this pattern yet, so I’m not sure if it’s been changed to reflect that technique (it was part of my feedback when I tested the pattern, but the process can be a little tricky to explain so I’m not sure if Katie included it or not, in an effort to keep the construction very simple), but just know that it *can* be done if you don’t want exposed seams in your suit!

Also, oops, probably should have caught the raw edge at the top of the triangle when I was topstitching down OH WELL.

As far as support goes – again, I can’t really vouch for it personally, but I will say that this version of the suit has a lot more options if you need a little boost. You could experiment with adding swimwear cups (I feel like even just sewing the bodice cups separately and slipping a swimsuit cup between the fabric and lining would probably work… don’t try to attach it to the lining, though, that’s where I went wrong!) to the bra, boning to the side seams, and potentially even underwire. As it stands for just a fabric+lining+elastic top, though, it’s supportive enough.

Again, these photos were taken before the swimsuit ever saw water, but I managed to wear it twice on my vacation, and it performs just as well as the black one. It may even be a little more secure, since you’re less likely to have a bathing suit malfunction due to the design.

I definitely plan on making this version again – I have plans for this bustier top with the high-waisted bottoms, in some cute lemon/flower swimsuit fabric. I almost made it up during the testing – but then realized I should probably take this striped one out for a spin so I can address any fit adjustments if needed. The suit does not need fit adjustments, btw, but on the next one I will pull the elastic a little tighter around the top edge of the top. It’s not quite as tight as it’s like it.

Also, I think this would make a really cut bralette. Ooh!

So, who’s convinced they should take the plunge into sewing swimwear? Seriously, guys – it’s really fun, it’s fast (and gratifying!), and once you realize just how little it costs to make a swimsuit, you’ll be side-eyeing the $80 ones at the mall for the rest of summer. Don’t think you have it in you to make a bathing suit? Ladies. If you can sew a tshirt, you can sew a swimsuit. Promise.

Tags: bathing suit, completed, knits, papercut patterns, soma swimsuit, swimsuit, swimwear

Comments 80 Comments
Categories completed projects - new

Completed: The Soma Swimsuit, V1

4 Jun

As promised, I’ve written up a couple of posts about the new Soma Swimsuit from Papercut Patterns. I was a tester for this pattern, so I’ve actually had this finished and completed for quite some time now! While I initially agreed to test just the cross-over bikini variation, I ultimately ended up sewing BOTH bikinis because they are just so damn fun to make! In this post, though, I’ll be going over the first version – the black cross-over bikini.

A note on pattern testing – it’s come to my attention that there has been a bit of discussion and debate about what exactly goes on for pattern testing, and what us testers get out of it. Some people have speculated that we are paid off to promote the designs, which could NOT be farther from the truth! Seriously, I WISH I was getting paid to to this – but I’m totally not. Pretty much all I get out of testing is a copy of the beta pattern, hopefully a copy of the finished pattern once it’s gone to print (not all companies offer this for testers but I think it’s a really nice gesture, personally), and a chance to see the pattern before anyone else. That’s it! Sometimes companies will give me fabric for testing – which I will always disclose if that’s the case – but for the most part, I am on the hook for providing my own fabric and notions. It is not required – or even requested – for me to post about the finished patterns, I just do it because I like what I make and I want to share it! I know some of the debate was about the same bloggers doing the testing, and while I can’t speak for the pattern designers, I will say that I have worked with the same designers for multiple testings, and it’s my assumption that they like to stick with the same people because they know they will get relatively consistent results, especially when it comes to sizing (it’s easier to tell if your size whatever has something wrong with the grade if you have that same person testing the same size for you consistently, if that makes sense).

I personally test my patterns the same way I sew a normal pattern – make a muslin if needed, do any alterations for fit that are necessary, and change the construction steps if I think it makes more sense to do so (and sometimes that ends up in the finished pattern – such as the lining method for the Flora dress, some of that was my feedback 🙂 ). I provide very detailed and honest feedback (VERY! Like to the point of maybe even being annoying 😛 haha), and I always meet the relatively short deadline. I would like to assume that’s why companies continue to reach out to me for testing, however, I’m recently aware that there are probably also people who use my feedback strictly for promotional purposes. If I offer good feedback and I don’t see translate to the finished pattern, that’s my sign that they probably don’t actually want my feedback and I just don’t work for with company anymore. Further, I don’t always blog my finished test makes (sometimes I only have time to do a fit muslin and tear the instructions a new asshole), so if anyone is contacting me in hopes of getting a sales boost from a finished project, they may be in for a rude awakening hahah 🙂

I’m so sorry if anyone got the wrong idea when it comes to pattern testing; the unglamorous truth is that we have a quick turnaround to check out the fit and instructions of the pattern and provide as much feedback as we can before the release. That’s it! Obviously I’d love to earn money doing this (ahh, who woulnd’t??), but the pattern barter is fine with me for now. I like helping my friends and giving them feedback so they can put out an even better product. Any other questions about testing from a tester’s perspective? Holler at me in the comments!

Ok, now that that’s off my chest – swimsuit time!

Like I mentioned earlier, this is the Soma Swimsuit from Papercut Patterns, version 1. I’m afraid I went the boring route for this one – I had black swimsuit fabric & lining on hand (destashed from a friend’s supply, so I’m not sure where it originally came from) with the intention of making a black bikini, and I liked Katie’s version in the promo photos soo much that I decided to blatantly copy it because I have no shame.

This swimsuit includes a lining, regular elastic, fold over elastic, and little bra notions (hooks, rings, and bra strapping). While I did have the fabric and lining on hand, I had to venture out to the fabric store to buy everything else. I was able to find almost everything I needed at Joann; however, be aware that they have a VERY limited selection of colors in these notions. Basically, they only have black and white – and their fold over elastic is expensive as shit, btw. I recently discovered Peakbloom as a wonderful source for FOE- seriously, look at all the prints and coloursssss omg – but I have yet to actually purchase anything from them. If you’re stuck in a FOE desert and need something other than black or white, definitely give them a look!

The only thing I could not find at Joann was bra strapping. I actually didn’t even realize that’s a thing that exists! It’s not exactly the same thing as elastic – it’s sturdier, it doesn’t stretch as much, and it just looks more polished. After making this swimsuit, I did eventually find it at Joann’s (it’s in the section where you buy trim by the yard), but it only comes in white. For my bathing suit, I took a more creative approach and bought a bunch of $1 elastic headbands from Walmart (the kind that feel like they’re made from bra strapping, hahaha) and cut those apart to use. They probably aren’t ideal – they are starting to fray where I cut them and it looks kind of bad – but it’s a good option in a pinch.

Another notion I used that is not listed in the instructions is bra cups! I don’t know about y’all, but I absolutely abhor the idea of nipping at the beach, so a little extra coverage was a must. While the insertion of bra cups is not included in the instructions for the swimsuit, it was pretty easy to figure out. After sewing the darts, I placed the lining over the bra cups in the correct position and smooshed the cups down flat. I sewed around the entire cup with a zigzag stitch to secure it, and then assembled the bikini top as instructed. That’s it! It was really easy and YAY NO NIPPING!

Oh, and in case you were curious – my bra cups are cut from old swimwear. I pick up tops at the thrift store when they’re on sale for $1, and I cut the cups out. It’s cheaper than buying new cups (which I’ve found can run as high as $8 a pair, ouch), it recycles the old cups, *and* I’m 100% sure they are swimwear appropriate since I literally cut them out of swimwear.

This was my second attempt at sewing fold over elastic (my first attempt is now buried in the trash, ha)(first attempt was not this swimsuit, btw, it was a few months ago) and I think I did a pretty ok job, all things considered! I was originally trying to sew the elastic in one fell swoop – which seems to be the way most people instruct you to attach it. The instructions for this suit instead have you sew it on in two gos – once with the elastic flat, and once with it folded over itself (on top of the first stitching). It takes a tiny bit longer since you are essentially sewing the same seam spot, but it actually goes faster since you don’t have to worry about your fabric sneaking out of the elastic. Which is AWESOME. Consider me a FOE convert – this stuff is fun!

The swimsuit bottoms just have plain ol’ elastic encased in the legs (just like the Bombshell swimsuit). I used black because that’s what I had on hand. I love the high cut of the back leg – cheeky! 🙂

The instructions on this pattern are really great, by the way! From attaching the elastic (both plain and FOE), to dealing with the bra straps, everything is very clearly written out and has helpful illustrations. I especially like how the lining is attached to the fabric – the bottoms have some pretty clever attaching so there are no exposed seams. Everything is attached flat, similar to underlining, which means you don’t deal with a lot of fabric shift.

For sizing, I chose the XXS, which is my normal size for Papercut Patterns. I didn’t have to make any alterations for fit – this is exactly how the pattern is drafted, both the top and the bottom. For fit reference, I generally wear a 28DD in bra and a S in underwear.

Here are some close-ups of the construction:

I know these don’t look lined, but I promise they are. My lining is black, so it matches the outside fabric 😉

Almost this entire bikini was sewn on my sewing machine, btw. I did use my serger to construct the main seams of the bottoms, as well as for finishing all the edges when attaching the lining to the shell, but that’s just bc it’s faster! All the finishing was done with a zigzag stitch. You can ABSOLUTELY make this on a standard sewing machine – I (mostly)did!

I’ve had a few people ask me about the support on this bathing suit, and I’m afraid I can’t really give you a good answer as I don’t personally need a lot of support for my lil’ boobs. I’d venture to guess that it probably gives about the same as a string bikini – it’ll keep the girls in place, but you prefer a lot of lift this probably isn’t the pattern for you. As far as adjusting the cups for a bigger size, again, no idea! This size fit me straight out of the envelope.

Now, if you want to talk about whether or not this guy is suitable (lolz) for actual swimming – I can vouch for that! While I did take these photos way before I actually got in the ocean (in retrospect, probably should have waited… I’m not quite as pale anymore! SORRY FOR MY WHITENESS Y’ALL), I wore this suit twice while in Florida, both times in the ocean. I’m not a crazy swimmer or anything – more of a jump in the waves and bob around on a float kinda girl – but I had no issues with the suit falling open or anything like that. It’s comfortable *and* cute! What more could you ask for?

I guess that’s it for now! Big thumbs up to Papercut for offering up such a great pattern – I’m so excited to see everyone’s versions that come out of this!

A couple things before I sign off here –

– Please give a warm welcome to my newest sponsor, Indie Stitches! Caitlan has a gorgeous little shop full of some of the best handpicked indie patterns – and she’s currently offering 10% off all purchases through June! Use the code LLADYBIRD to claim yo’ discount!
– As a side note, whenever my sponsors offer a discount to my readers, you can find it by hovering over the badge in my sidebar. If there is a discount offered, it will show in a white box if you hover your mouse over it. Just an fyi 🙂
– Lookeeeee me, I got my first ~magazine spread~! My favorite machine needle company, Schmetz, has a free online magazine Inspired to Sew and I’M IN THE JUNE ISSUE. A whole two-page spread, woohoo!! You can download the free issue featuring moi here. Let me know what you think!
– Also, I’m apparently in a recent issue of All You magazine as well. Nothing super exciting – it’s just a photo and quote about my experience with Healthcare Bluebook (that shit is awesome, btw. Saved my ass when I was stressing over a kidney stone+no insurance last year!). If any of y’all see my mug in there, pleaseeeee let me know! I’m dying to know what part of my conversation they quoted haha 🙂

Ok, that’s all! Stay tuned later this week for version 2 of the Soma Swimsuit! :DDD

Tags: bikini, completed, knits, papercut patterns, soma swimsuit, swimsuit, swimwear, two piece