Tag Archives: stretch pleather

Completed: Ooh La Leather Leggings

26 Jan

Ok, so, the title of this post is a tiny bit misleading – these aren’t leather leggings so much as they just have a panel of faux stretch pleather. BUT, it sounded catchy (as long as I ignore all the weird Google search terms that will likely lead people straight to this post, aiee), so it stays.

Leggings & Ensis Tee

Anyway, like, ~Ooh La La Leather~ or some shit, amirite?

Leggings & Ensis Tee

In all seriousness, I’ve mentioned before that this is my favorite leggings pattern. I have a couple more patterns in my stash that I haven’t even bothered to try because I JUST CANNOT QUIT me some Ooh La Leggings. I love the way they fit and I love the seaming detail. Made up in a thicker ponte, they almost pass for actual pants. Made up in a thinner material, they are great for lounging and sleepwear. Made up in some crazy lycra, they make amazing workout/yoga pants. Basically, they are my dream leggings and you will have to pry this pattern out of my cold, dead hands.

Because I love this pattern so so much, it goes without saying that I’ve made a metric Shit Ton of these leggings over the past two years. Obviously most of them haven’t made it to the blog – after sharing a couple pairs, they kind of get redundant. And y’all know how much I hate redundancy, at least when it comes to my own blog. So while you might occasionally see a pair pop up in a post (without needing to be the center of attention), they spend much more time in the real world than they do the blog world. And I do wear the shit out of all my pairs, so there’s that.

Leggings & Ensis Tee

With that being said, I think it’s ok/non-redundant to post about this pattern if I’ve done something ~unique with it. Which is exactly what I did. Check out my (faux)(p)leather (paneled) leggings, y’all!

Leggings & Ensis Tee

I found this stretch pleather on Goldhawk Rd while fabric shopping in London. It was one of the very few things I had on my list to buy, as I knew I’d need to be able to actually touch the fabric to make sure it stretched enough and wasn’t toooo shiny. Not that I’m against shiny pleather pants – I had a pair when I was in high school, back when I worked at Hot Topic and thought I was sOoOoOo punk rock (and no, I have no idea why my mom didn’t veto those things! HAHA! I must have looked like such a little baby hooker!) – but, being nearly 30 now, I’m an adult and I have to tone things down just the tiniest bit, at least when it comes to my pants. ANYWAY, this pleather is pretty good, I think – as far as pleather goes. It’s very stretchy, it’s not too shiny, and the wrong side has a nice fabric backing so it’s actually quite comfortable against the skin. Or, rather, as comfortable as pleather leggings can get.

Leggings & Ensis Tee

Since my pattern was nice enough to already have all the piecing done for me, I just cut the side panels in the stretch pleather, and the remaining pieces (front and back legs, as well as the yokes) in this black polyester Ponte de Roma. The Ponte de Roma was pretty shiny on one side – like, way more shiny than I was expecting – so I sewed it with the wrong side facing out, which looks a bit more polished. I sewed everything on my serger, as I do, and omitted the topstitching as I was afraid that piercing the pleather would cause it to wear holes that would eventually tear.

As far as actually sewing the pleather, that part was surprisingly easy! Keep in mind that stretch pleather (as well as non-stretch, as well as leather, etc) does show pin holes, so you need to be reeeeeally mindful of your pin usage (aka, don’t use ’em if you can’t pin inside the seam allowance!). I traced my side panel piece with a Chaco liner before cutting on a single layer. I did not pin my pieces together, except for one part at the hem just to hold it in place while I topstitched (I usually don’t pin my hems for knits, just press them – but you can’t press pleather! One little pin hole at the hem is ok with me, anyway). The sewing part did not require any special forethought or tools – due to the fabric backing of this material, it went through my machine just fine without the need for a Teflon foot. I used a regular stretch needle. Et voila!

Leggings & Ensis Tee

While I’ve got your attention, I guess I’ll also talk about my shirt – because y’all know I made that shit too!

Leggings & Ensis Tee

The pattern is the Ensis Tee, also from Papercut Patterns (ooh, I just heart me some Papercut!). I’ve made this before, albeit in a thicker/less drapey knit, so I think this version deserves a little bit of spotlight 🙂 It’s amazing how different it looks with a drapier fabric, yeah? Honestly, I like this version a lot better – I think it’s a lot more flattering (plus, it’s wool, so it’s pretty snuggly!). The top yoke is a piece of wool knit I bought in Paris, and the bottom is this cool steel grey sweater knit. I bought that knit on a whim, and it’s pretty cool – it has a lot of dimension to the color, and you can really see the knit stitches due to the somewhat loose gauge. It’s also wide and VERY stretchy in both directions – I might use the rest to make a pair of tights. Also, I need some kind of grey knit intervention. I keep buying pieces and this shit is getting out of handddd. Like, I really want that pewter grey but I’m gonna resist. I must resist.

Leggings & Ensis Tee

This is basically the same picture as above, just without my head.

Leggings & Ensis Tee

This tee whipped up fast! I had it cut and sewn within a couple of hours – and honestly, it took that long because of all the topstitching I added. I topstitched the colorblocking at the yokes and sleeves, as well as the neckline, using my stretch twin need and wooly nylon in the bobbin. I think it adds a little extra to an otherwise plain tshirt. Oh, and that yellow tab at the neckline is my laundry reminder not to wash this in the machine – because it’s wool 🙂

Leggings & Ensis Tee

I kept the curved hem, left off the hem band, but added cuffs to the sleeves. Happy sweater-hybrid-tshirt-thing!

Leggings & Ensis Tee

And here are my leggings again, because I know you’re just dying to see them one more time. As a side note – I used a different method to attach the elastic waistband (rather than feed it through a hole like the pattern instructs). I took some pictures while I was doing this, which I’m hoping to make into a tutorial at some point later this week.

Leggings & Ensis Tee

Anyway, that’s mah new threads! Basics with a lil’ twist! What do you think? Am I going to burn someone’s eyes out with my leather leggings? Should my mom have not let me leave the house in those pleather pants? Man, I wish I had pictures of that ensemble. Sooo glad the only social media platform we had back then was makeoutclub.com HAHAHA.

As a side note – if you think my hair looks green, it’s because it is! It was due for a redye, and I decided to go green 🙂 I’m using a new dye that I bought in London, at the suggestion of Nicole – we’ll see how it holds up! I gotta say, I’m not looking forward to the fading… green always fades so ugly. Also, these pictures are REALLY deceiving. It’s much brighter and more emerald in real life. I took these pictures on a grey and overcast day, so the color is kind of sludgy here. I don’t know how to color correct my photos, so this is what you get. Sorry, not sorry 🙂