blazer | LLADYBIRD

Tag Archives: blazer

Completed: Reworking A Vintage Blazer

Here’s a big ol’ project I worked on for a couple months this summer that I believe warrants a whole ass blog post!

Fair warning – there are a LOT of photos in this post. I tried to narrow them down and include some collages, but… don’t say I didn’t warn you!

This project started with me wanting to make a blazer – but after months of looking and just not feeling any of the fabrics I was seeing, I decided I would try altering one instead. I’ve altered plenty of blazers, jackets, and coats for lots of clients + photoshoots over the years, but I’ve yet to really tackle complicated alterations beyond sleeve shortening and taking in the body (since, understandably, most people don’t need those kind of crazy alterations!). Over the summer, I worked closely on a photoshoot set with a master tailor here in Nashville, Loretta, who was delighted to share a lot of her trips and tricks with me. I spent some time looking for the perfect blazer for this project, and eventually found this 70s gem at the Southern Thrift in West Nashville, for a grand $5.99-

As you can see, the before wasn’t super terrible! Obviously the sleeves were a little long and the back a bit saggy (there was no size tag in this jacket but I suspect it was probably 1-2 sizes too big for me). I also felt like the shoulders were a touch wide, and the length a little too long. But I loved the fabric and knew I could work some magic to get this bad boy to fit the way I liked!

I started with pulling off the buttons, the back belt, the cheesy patch pockets (I’m sorry, but they are SO cheesy lol and were also poorly sewn on!). I removed the entire lining from the shell and set about my alterations first. Here is what I ended up doing:

Narrowed the shoulders by 1/2″
Added shoulder pads (the original ones had disintegrated into the jacket hem! I am STILL finding old shoulder pad dust in my studio, despite regular vacuuming!)
Took in back arm seams 3/8″
Took in side back seams 1/8″
Took in center back seam 1/2″
Shortened body length 2″
Shortened sleeve length 3/4″

This was accomplished by lots of pinning, basting, trying on, and taking photos (so I could see what the back looked like). Usually when I do these alterations, I work with a client who is already wearing the jacket – so it’s quick and easy to pin where needed. It’s a little harder when you are doing it yourself, but still totally doable!

After finishing the alterations, I could work on the fun stuff – adding design elements to the shell! I knew I wanted to change those patch pockets out for double welt pockets. I also wanted to include sleeve vents with functioning (!!!) button holes, a single welt breast pocket, and an interior “Barcelona” pocket.

Since I had removed the patch pockets and back belt from the original jacket, I was able to carefully disassemble them which gave me some fairly good-sized pieces of fabric to work with. Adding the double and single welt pockets was pretty straightforward and easy – it’s the exact same as sewing on a piece of fabric, you just have to contend with, well, an entire jacket getting in your way haha. I used the instructions + pattern pieces from the Closet Core Patterns Jasika Blazer for the two exterior pockets, and a beloved In-House Patterns tutorial for the inner pocket. Honestly, the hardest part about this endeavor was figuring out where exactly to put the pocket! For the outside pockets, I drew chalk lines directly on the blazer and checked the proportions in the mirror until I was happy. For the interior pocket, I went a little lower than my chest after looking at loads and loads and LOADS of blazers online with interior pockets – consensus seems to be that it starts right below the welt of the outer breast pocket. Which makes sense, as you don’t want whatever you put in that pocket to sit right on top of your breast. Well, I don’t want that anyway haha.

For the sleeve placket – well, that was a fun experience! The original jacket had no placket – just buttons sewn straight on a plain sleeve. Loretta had shown me how to shorten a jacket sleeve with a working button placket, which is the same process as adding a placket. You just sew fabric to the edge to create a placket extension; all the seams are hidden when it is finished. I had no idea shit would be that simple. I think the scraps I used came from the back belt. For a step by step, I followed these directions for sewing a back vent (a back vent and button placket on a jacket are essentially the same – except there is no exposed line of diagonal stitching) from Waffle Patterns. The hardest part of that was getting the corners to miter correctly haha. Wish I could give y’all some tips for that but TBH I just used a lot of trial and error and unpicking until it was right.

I also decided to change out the lining, after determining the original lining – while a really beautiful soft pinkish beige – was just too smelly and discolored. I took the lining apart and used the pieces to cut a new lining from a piece of silk charmeuse that I already had in my stash (here is a blog post I wrote a few years ago about replacing a lining in a coat, which is the same process I used!). I made sure to add my alteration adjustments and sleeve plackets to the pieces, then sewed the whole thing together and bagged it in. I did hand sew at the sleeve button plackets and near the front facing (you can sort of see the pins in the above photos), but the rest was done by machine.

After THAT was done (whew!), I added some fun finishing touches 🙂 I sewed buttons + button holes on the sleeve plackets (using the original buttons, cos, well, I like them!), added a leather hanging tab + label to the back facing – oh, and I made a sweet wool felt embroidered undercollar!

To make the undercollar piece, I cut some Swedish tracing paper and traced it around the undercollar, trimming and refining until it was the exact same size. Then I cut it from wool felt (which I ordered the The Felt Pod); my piece was wider than the felt so there is a seam in the center. Then I embroidered it by hand with a simple chain stitch, and attached it directly over the existing undercollar using embroidery floss + a blanket stitch. It’s not visible when the collar is down, but it is a fun surprise when flipped up!

I actually finished the whole thing about a month or so ago, but didn’t get around to taking photos until this last weekend. I’ve said it before, and I’ll say it again – taking photos is the part I hate most! So, like, enjoy or something 😛 I’m pretty sure my neighbors did considering that came outside RIGHT WHILE I WAS SHOOTING THESE dear lord can you see the fear in my eyes?

And if you don’t want to look at my mug (it’s cool, I don’t want to look at it either), here are some dressform shots:

I think that’s about it for this project! I had a lot of fun digging into this one and feel extra confident in my alteration skills as a result. Funnily, the original jacket isn’t very fancy – it’s actually pretty cheaply made as far as jackets go. The wool is a blend, and there wasn’t much tailoring inside the shell apart from a bunch of interfacing. Spending so much time + effort (and silk lining lol) was basically the equivalent of polishing a turd – but, you know what? I love how it turned out, and I learned a lot during the process. I don’t know if such an involved reconstruction would be worth it if you were paying someone else to do it – but for me and my sewing practice? It was perfect. I was only out about $10 for this project (the jacket + wool felt, as I already had the lining in my stash) which we can all agree is WAY cheaper (and faster!) than making the dang thing from scratch!

I will always love making garments from their humble fabric beginnings, but truly, you can’t beat a solid reconstruction (or even just a couple simple alterations to an otherwise great + previously-loved garment!). This might be the most sustainable I get when it comes to sewing, ha! How about you? Does this inspire you to give it a try?

Tags: blazer, completed, jacket, lining, reconstruction, vintage, wool

Comments 34 Comments
Categories completed projects - reconstructed

Completed: Navy Ponte Morris Blazer

10 Nov

Continuing on the Navy Train (although not really, bc I actually made this shit ages before I made my Navy Twill Gingers), here is what I guess we can consider the other half to my ~casual navy suit~ – the blazer!

Although, unlike most blazers – this one is made of a ponte knit, which makes it about as comfortable to wear as a knit hoodie. I dunno about y’all, but this is basically a huge score as far as I’m concerned.

The Morris Blazer from Grainline Studio has been out for a while (and yes, I completely acknowledge that my finished blazer looks exactly like the shop sample no regrets), but I initially disregarded it as an option for my wardrobe as I haven’t bothered to wear a blazer since pretty much my very first office job. Even when I was working in office environments up until I switched to a more casual work life a few years ago, I eschewed the (often uncomfortable, often ill-fitting) blazer in favor of simple and much more comfortable cardigans. Actually, I had a really beautiful black wool blazer that I bought on sale at Bebe when I was in high school (lol anyway, but you’d lol even harder if you knew me in high school because my preferred places to shop were generally Hot Topic and the kid’s section of Goodwill hahahahah oh teenagers) that I wore the hell out of, and it was sadly stolen right my desk when I was 19, at the T-Mobile call center I was working at. To whoever stole that thing: fuck you. Also, I hope you couldn’t fit into it. I was really really small back then, like 90 lbs small. My clothes from back then were fucking comical… and also the reason why I learned how to sew in the first place. Alterations! Yay!

ANYWAY MOVING ON.

What eventually caught my attention about the Morris Blazer is that it is a much more casual take on the traditional blazer – obviously you can’t wear this in a corporate environment, but it’s still a step up from that aforementioned hoodie. It is intended to be made using a stretch woven fabric, and the blazer is unlined. I’d seen some people make it out of a ponte knit, which really piqued my interest because I am all about some ponte knit and its secret pajama properties.

I used a navy nylon Ponte de Roma from Mood Fabrics – it’s currently sold out in this colorway, but they have other colorways and it tends to go back in stock pretty frequently, FYI. I have also bought this ponte in the black & wine colors – it is great! Nice and thick, a good heavy stretch in 4 directions, and it remains opaque and holds its shape quite nicely. It washes really well and I haven’t noticed any pilling on any of my pieces. The rayon content makes it feel a bit nicer than the pure poly stuff, but the spandex/nylon additions give it that good recovery so it doesn’t bag out of shape over the course of the day.

I initially was a tiny bit concerned about using this fabric, as the Grainline website really suggests against using knits with a 4 way stretch – this pattern is intended for 2 way stretch wovens, so that the blazer doesn’t stretch and sag downward against the facing. I couldn’t find a good knit fabric that was heavy enough, had the intended stretch amount, *and* came in the color I wanted, however. So I threw caution to the wind and just used this stuff. I’ve been wearing the finished product for about 2 months and I reckon it turned out fine. So, in case you were wondering about 2 way vs 4 way stretch with this pattern!

I made the size 0, which is my usual size for Grainline patterns. I lengthened the sleeves to full-length – bracelet length is pretty, but I’ve decided there is no place in my life for that nonsense (either I’m cold enough to need full sleeves, or don’t want sleeves at all. My sleeve opinions are very black and white haha). I had also originally raised the armholes by about 1″, since I found the armholes in my Lark tee to be about that much too low (if you’re wondering why you don’t remember that post, it’s cos I haven’t written it yet haha), but lowered them back down to the original size when I tried on the blazer without sleeves. I used fusible tricot knit to interface the facings (I did not interface the entire front section, which is suggested in the sew along if you use a 4 way stretch as I did), and sewed most of the construction on my serger, with all topstitching done on my regular machine with a straight stitch.

Overall, I found this pattern really easy to follow. There is some interesting seam wizardry going on to create that shawl collar out of the shoulder seams, but none of it is particularly difficult. I like how the hems are all faced, and I like the topstitching detailing – especially at the bottom hem, which I know some people weren’t a fan of. I like that the knit fabric makes as comfortable as wearing a ratty hoodie, without actually looking like a ratty hoodie. I wasn’t sure if I would like that it didn’t have closures – I am the sort of person who never wears things open; if there are zippers or buttons, they are done up – but it hangs really nicely and I rather like how smooth and streamlined it is. One thing to note is that the facing is not tacked down at the front of the blazer, except at the shoulders and where it is caught in the hem. I read some reviews that people did not like how it flipped out, however, I haven’t found this to be an issue with my blazer.

I have worn this quite a bit over the past couple of months – it’s a nice protection against the freezing a/c blasts Tennesseans love to subject people to, and a pleasant style change from the basic cardigans I usually carry around. I think this pattern combined with the Pinot pants would make an awesome ponte fake suit – you know, kind of dressed up from a distance but TOTAL LEISURE COMFORT in reality haha.

Also, in case you were curious -I also made the rest of my outfit! The jeans are Cone Mills Ginger jeans, and my tshirt is a Renfew made with bamboo knit ♥ that knit is another fabric I buy over and and over again – because it’s awesome! It’s super soft, incredibly stretchy without being sheer, and has an amazing recovery. It’s also super wide, so I can cut a long sleeve shirt out of a single yard of fabric. It tends to go in and out of stock quickly, but it looks like they just restocked the website. FYI!!

Tags: blazer, completed, Grainline Studio, Mood Fabrics, ponte, ponte knit

Comments 28 Comments
Categories completed projects - new

Completed: The Victoria Blazer

15 Jul

Remember when I made those Maritime Shorts and I swore I’d make a matching blazer to satisfy my inner Tina Turner?

Welllll that happened.

AWWHHH YEAH!!

Don’t get mad at me, but it actually happened last week. I just got around to shooting pictures of this guy, hence the delay. Sorry!

You can also see my camera remote in these pictures, haha! I just figured out how to use it for this ~photo sesh~, so there ya go. I must say, taking pictures is a HELL of a lot easier when you’re not reliant on the self-timer. I just stood in one place and snapped away, it was pretty awesome!

Anyway, so this here pattern is the Victoria Blazer from By Hand London. This shit is extra special because 1. The pattern was PERSONALLY HAND DELIVERED to me via the beautiful and charming Elisalex while she was in Nashville at the end of May; 2. The fabric is yet another chunk of the endless yardage gifted to me by Sonja during last year’s swap; and 3. IT’S PART OF A MATCHING BLAZER AND SHORTS SET, HOW FUCKIN AWESOME IS THAT.

Oh, and the inside is purple.

So, this was a pretty easy pattern. I don’t understand why people have such an aversion to sewing lined jackets – it’s essentially the same process as sewing a lined dress. Were this jacket fully tailored, with all the padstitching and a back stay and fancy welt pockets or whatever, I could understand the hesitation. But, guys, all of you are capable of sewing this. It’s a jacket – an easy jacket, at that – with another jacket inside it, inception-style.
(oh god I just realized I inadvertently gave myself a weenie in this picture… ignore that, ok.)

I cut the veeeeery smallest size – the 2/6 – and made the cropped version. The pattern calls for a partial lining (the sleeves are left unlined), but since the cotton voile I used the line the inside is srsly the most buttery smooth fabric IN THE WORLD, I thought it was a shame to not have it against my skin and thus chose to also line the sleeves. This is super easy – I just set them into the lining, same as the shell, and then finished the bottom with a french seam as instructed.

I know, this looks super ridiculous with the matching shorts (hahaha y’all shoulda SEEN Landon’s face when I stepped out of the sewing room in this get-up!), but I think it will look really nice with my dark jeans.

It’s such a departure from my normal, everything-fitted style, but I like it!

The sleeves did give me a bit of trouble at first, but it turns out that I accidentally set them in backwards. Oops! Make sure you pay attention to those notches!

OH MY GOD, I took way too many pictures and I’m just going to dump them all right here.

I love these tags from Sweet Little Chickadee! I should also point out the running stitch along the top – that goes all the way around the jacket, through both the lining and the shell (you can’t see it from the outside since the lapels cover it). The lining didn’t want to behave and stay inside the jacket where it belonged, so I used embroidery floss and handstitched around the edge of the lining. It keeps everything in place, and I think it looks pretty as well!