This jacket has been a LONG time in the making. Totally worth the wait, tho.
My dream bomber jacket! ♥
I swear, ever since Katie released the Rigel Bomber jacket for Papercut Patterns, I have noticed this style popping up EVERYWHERE. Talk about being on point with style trends! I knew I wanted to make the jacket when I first saw the pattern last winter – it’s a great, casual jacket and I love the short length (sometimes my Minoru just feels a touch too long, depending on what I’m wearing with it – not to mention, the cotton/poly fabrics mean it’s not the best choice for super cold temperatures!). It’s totally different from any other pattern I own, so obviously I wanted to make it. Once I saw Clare’s Rigel bomber making it’s rounds – and then saw the dang thing in person during our trip to NYC earlier this year – it became Very Important that I have one in time for this current winter. Especially since I tried hers on and it looked ace on me. As you do.
Since I was in bomber-mode for the duration of that particular shopping trip, I made it a point to source the notions I knew I’d have the hardest time finding – rib knit and a separating zip. In the mecca that is the Garment District of New York City, these things are relatively easy to find (well, at least compared to the Limited Fabric Options of Nashville, ha!). I found both of these things at Pacific Trimming – the rib knit came from the very back corner of the store, and the zipper is a Riri zipper! I chose the colors, specified the custom length according to my pattern, and paid something insane like $20 for it. I don’t actually remember how much the zipper cost, because I mostly blocked it out of my mind – but suffice to say, it cost significantly more than the $5 zips you can pick up just about anywhere.
I do want to talk about the Rigel a little more before I start going on a tangent about my notions, though. I sewed up the XXS – one, because that’s my Papercut size, and two, it’s the same size as Clare’s and I liked the way hers fit on me. I did not make any length or fitting adjustments to the pattern, just sewed it straight out of the envelope. The instructions on this pattern are great – you are guided through the steps of adding a single welt pocket, attaching the ribbing, and inserting the open-ended zip. The only part of the instructions that leaves a bit to be desired is the lack of lining – which most blog posts I’ve read have mentioned. My assumption here is that Katie wanted the pattern to be as quick and simple as possible, and adding a lining to this sort of jacket is either going to be complicated (at least to write out the instructions for) or involve a lot of hand-sewing. It’s not terribly hard to add a lining, but it does require some brain aerobics before you start sewing.
Part of what took this jacket so long to incubate was that I couldn’t decide on a fabric! I bought my zipper and ribbing before anything else, so matching a wool fabric (yes, it had to be wool) to all that gold was a little tricky. Not to mention, my notions were a bit special – if not expensive – so I wanted to make something that I’d love and actually wear. I hemmed and hawed for MONTHS over what fabric I wanted to use… this double-faced black wool coating was my #1 contender. I actually got a swatch of it back in the spring… and it’s been pinned to my bulletin board ever since (sometimes I just make myself look at a fabric for a long time, and if I don’t get sick of it – it’s mine!). I finally bought it last month, which is actually REALLY lucky because it’s sold out now! I like how the embroidered floral design gives the fabric some interest and texture, while still keeping it relatively plain (so it doesn’t compete with my trims).
I will mention that the fabric description is a bit off. I guess it doesn’t matter at this point, since the fabric is sold out – but it definitely feels more like a light to medium weight fabric, NOT a heavy coating. The wrong side is brushed with long fuzzy strands of fabric fiber, and this fabric SHEDS LIKE A BITCH. Even though my jacket is lined, I serged every single seam of the wool because I couldn’t otherwise control the shedding. I really don’t recommend trying this fabric if you can’t serge the raw edges – a plain straight stitch won’t prevent it from eventually disintegrating.
Also, on a bit of a bummer-town note – this fabric doesn’t really wear well. It’s already starting to pill and look kind of old 😦 So this jacket might not have a super long lifespan as it is. Good thing I can always salvage that ridiculously expensive zipper! :DDD
I don’t know why I’m winking in this photo (just imagine me taking my pictures with a remote and tripod and things get even creepier with the winking ahaha)? Anyway, here’s the lining! I lined the entire jacket with gold china silk, which goes really nicely with my gold accents. I love the warm combination of silk+wool – it’s lightweight, and while it probably won’t work well in the Arctic, it’s fine for our mild winters (or a mild spring up north).
I will deviate for a second here to talk about the lining. As I mentioned, the instructions don’t tell you how to do this. Further, while there are lots of posts scattered around the internet on how to line the Rigel, none of them were exactly what I wanted (NO raw edges, no hand sewing). I wanted to try bagging the lining – which, spoiler alert, that shit totally worked! I used to do this all the time when I worked for Muna last year, but my memory was a little spotty, especially since we never used written instructions for anything (I like instructions when I’m sewing – even if it’s just a checklist – so I don’t forget to do something important!). I used Jen’s tutorial on bagging a jacket lining to jolt my memory, which was extremely helpful. Here are the steps I took to get my lining in that dang jacket:
1. First, I drafted some lining pieces – using the facings as a guide, I removed that amount from the jacket pieces (the front, the back, and the sleeves), and added 3/8″ seam allowances. I also added an ease pleat to the back piece, but I haven’t ripped open the basting yet because I found that I don’t need it. Someday, it will pop open and scare me, probably.
2. I constructed the entire jacket – up to the ribbing and zipper. The lining was completely assembled, with the facings attached.
3. I sewed the two jackets together at the neckline and zipper, as instructed by the pattern (for attaching the facing), and pressed and understitched.
4. I sewed the bottom of the zipper and facing, as instructed by the pattern (some of the lining may later need to be unpicked to get it to turn correctly, this is ok!)
5. I sewed the lining to the seam allowance of the ribbing at the bottom, right sides together.
6. I attached the lining to the sleeve hems at the ribbing, right sides together.
7. At this point, I had a giant Möbius tube of jacket+lining with everything attached and no openings anywhere. It was slightly horrifying – and exactly on track. This is when you rip open a section of the underarm lining that’s already been stitched, and pull the entire jacket through the hole.
8. Press everything, and then sew up the hole. I actually close up my hole from the inside by machine as much as I can, and then sew the remaining inch or so shut on the outside (I tried to take pictures to show how I do this, but it’s really hard to understand if you’re not actually seeing it in action. Needless to say, my closed-up hole is only about an inch long, instead of the 4″ tear I had to make to get the jacket pulled through it).
9. The little sections at the bottom where the facing meets the ribbing will need to be sewn shut by hand.
AND JUST LIKE THAT – A COMPLETELY BAGGED LINING WITH NO VISIBLE SEAMS! Woohooo!
Ok, now we can talk about all the fun trimmings!
What I neglected to tell you guys about this ribbing is that is actually has sparkly gold stripes. It is amazing! Pacific Trimming sells these in 1 yard pieces – and I needed two pieces. They’re about $8 a piece, if I recall correctly (they won’t cut them down, at least, they wouldn’t when I was there!). Also, when I pressed them, they smelled like a fart (I actually wrote this in my sewing notebook, so it must be important and worth mentioning, I guess). Must be all the polyester?
The Riri zipper looks really nice with the sparkly gold, I think! I still haven’t decided if it was worth the obscene price I paid. On one hand, it was really cool to be able to pick the zipper based exactly on my specifications – color, length, everything. It does feel solid and it is really satisfying to zip up (Riri zippers are referred to as the ~Rolls Royce~ of zippers, I’m told). That being said – $20 for a zipper? Yeah. I dunno. It sure is pretty, though!
Have a photo dump:
God, I’m sorry about that.
Anyway, I LOVE my new jacket and I’m so glad I took my time with choosing the right fabric (as well as figuring out that lining!) because the end result was so worth the wait. I’ve been wearing this thing constantly since I finished it – just in time for the weather to get cold, it seems. I’d love to make a patterned version of this one – either with some floral wool (LIBERTY?!), or something polka dotted! Can’t have too many bombers amirite. I even have a couple more pieces of rib knit that I apparently bought during that shopping trip that I completely forgot about. They are black with white stripes. Thanks, past Lauren! ♥
Oh! And my pants are those Jamie Jeans I made a couple of months ago. Just mentioning it because I ended up taking in the inseam a little bit more after that last post, so you can see what they look like now. I think the fit is much better! I’ve found I can usually go about 3-4 wearings between washings on these, before the knees bag out enough to drive me crazy.
Lastly, I will leave you with this outtake. Not sure what I was doing there, but it made me laugh, so hopefully it’ll make you laugh too! 😀
Have a great weekend, y’all!
LLADYBIRD 