A couple of weeks ago, Landon and I went to the mall – specifically, Gap – to find him a new pair of jeans. While we were browsing around (well, he was browsing – I just kind of lurking and judging the shit out of everything SORRY), I came across this stripey button-down goodness. I was mostly enamored with the horizontal stripes – loose fitting shirts aren’t so much my bag, and besides, those long sleeves would get worn for about two weeks in this climate – so I thought I’d make my own with a few modifications.
And make it I did! Woohoo!
This was definitely a waffling sort of project – I waffled on what style of shirt to cut, I waffled on stripe direction, I waffled on sleeve length, and I waffled on buttons. Fortunately, everything came together quite well and I’m super pleased with the end result!
I started out with my base pattern, Butterick 5526, since I knew this little dude already fit me pretty well. I knew I’d be using this pattern from the start, but what I waffled on was which view to cut – straight lines or princess seams? Obviously the straight, less fitted view would be more true to the original inspiration – not to mention easier to cut and match up those stripes. However, I don’t really like weight loose-fitting clothing – and when I do, it either better be something super drapey (which this shirting fabric is not) or, like, the dead of winter. Princess seams were the next option, which seemed like a good idea until I realized that the stripes would start staggering over the bust and not match up properly as a result. I considered cutting the stripes vertically, until I realized THAT would even be a hotter mess – plus, the horizontal stripes are what drew me to the shirt in the first place.
I took a sewing break to watch some infomericals, and thus realized the answer to my problem:
POCKETS!
Hell yeah Imma slap a pocket right over those broken stripes and NO ONE WILL BE THE WISER.
So. Let’s talk about horizontal stripes across princess seams. As you can see here – it *can* be done. Obviously the stripes won’t match all the way to the top of the seam, but you can cover the worst parts with a pocket, or just pretend they’re not there. I cut all my fabric on the single layer and I’m pretty happy with how my stripe-matching turned out – if you stand back and squint, you can’t even tell that there are seams down the front of my shirt! Yeah!!
I used this Marc Jacobs red striped cotton shirting from Mood Fabrics to make my stripey shirt. You’ll probably notice that the stripes in the picture are vertical – I had to cut the pattern on the cross grain to get those horizontal stripes. Doing so sacrificed the tiny (like, super super miniscule at best) amount of stretch on the grain, but I think the shirt fits fine as it is. Fair warning if you are working with a more fitted pattern – take the lack of stretch into account if you’re cutting on the crossgrain.
To match up the stripes, I just sewed reeeeally really carefully (after accurate cutting, I should add!). I really love sewing plaids and stripes – I find the challenge refreshing, and the end result is SO freaking gratifying!
If you’re at all familiar with this Butterick pattern, you’ll know that it doesn’t come with an option for short sleeves – just long, and 3/4 length (or, rather, on me – almost-but-not-quite-full-length, wtf). Also, the sleeves in this pattern kiiiinda suck – they’re really huge and wide, and the sleeve cap has waaay too much ease, at least for the princess seamed version (the plain version has a lower armsyce, since it’s more loose-fitting. My guess is that Butterick didn’t feel it was necessary to redraft the sleeves to fit the princess version, which is lame and shitty and boo on you, Butterick).
Reducing the sleeve cap ease was easy – I just followed Casey’s method. Figuring out how to get my beloved fitted, short sleeve started another bout of waffling. I waffled on sleeve length, I waffled on fit, I waffled on whether or not to add a cuff. In the end, I took about 1/2″ off each side of the sleeve seam, and put the sleeve on and marked where I wanted it to hit. I finished it with a 5/8″ narrow hem. It’s pretty simple, but sometimes simple is the best option, yeah?
The only thing I would change for the next round is to lower the pockets – I went with the markings on the pattern, but I think they are a little too high and should be about 1″ lower.
The pockets were REALLY fun to sew, by the way! Lots of ironing little creases, and turning sharp points, and precise topstitching (my favorite!). I just love how they look, especially with the little pleat in the middle.
As with my previous shirt, the seams are finished with a simple serge (I generally prefer flat-felled seams on this style of shirt, but flat-felling princess seams is NOT something I want to try to attempt right now!) and topstitched with a slightly longer stitch length. Besides the trauma of cutting and matching all those pieces, the actual construction of this shirt came together pretty quickly.
Also, I should note that I totally boringed-out on the buttons for this guy, and went with plain off-white shirt buttons. I like the way they look, though! 🙂
And I just love how it turned out! Simple, summery, and a little nautical – without looking costume-y. A win in my book!
As a side note – I mentioned this on Twitter and Instagram last week, but in case you haven’t heard – I’m teaching Introduction to Fashion Sewing this summer at Watkins College of Art, Design & Film! The 9 week class runs all the way through June and July, and I’m so excited about it! Nashvillians, if you’re interested – you can see the summer course catalog here (I’m aaaall the way toward the end, on page 13). Yeeeah summer crafty time! 😀
LLADYBIRD 