Soooo this is a little different from what I usually offer up here for my Mood Sewing Network posts – we are gonna talk about home decor fabric today! ::evil laugh:: No wait, come back, I promise it’s not all bad!
Forreal, though, I’ve known about Mood Fabric’s home fabric offerings since, well, the beginning of my Mood-time. And while I’ve never been one to futz much with home decor sewing (I mean, c’mon, wouldn’t we rather all sew clothes for ourselves?), I did have some chairs that needed to be recovered. Like, two years ago. When I bought them.
So, in celebration of Mood Fabric’s new home decor storefront opening (which I’m really excited to visit when I’m in NYC next week! Eep! Next week!), I bring you my chairs that are badly in need of a facelift.
Lookit that bad boy!
No, that’s not even the worst – look at THIS! Can you believe I sat on that rank-ass looking thing for over 2 years? Yeah. I blame it on not being able to commit to the perfect fabric. Either that, or laziness. Probably both.
So, finding a good home decor fabric is hard, y’all. The ~free spirited artist~ in me wants something with bright colors and textures and maybe peacocks… but the tiny adult in me knows I should pick something more subdued that will continue to work with my ever-changing decor. I think I found a nice middle ground, though, with this chartreuse geometric cut velvet fabric. Even though it’s chartreuse, it’s pretty mild by home-decor standards (the color doesn’t necessarily “match” my curtains, but it goes well enough), and the geometric design gives it a bit of fun texture and visual interest without assaulting your senses. I like it!
Soo, that brings us to the next step – the upholstering.
Well, first off, let me just say this – it’s really easy, at least with a simple chair like this. Those of you who are diehard professional re-upholsterers, please avert your eyes. I’m sure I’m doing everything wrong here, oh well!
PART ONE: THE DESTRUCTION
First, we have to remove the chair pad from the chair frame. It should unscrew from the bottom. Take everything apart and stash the screws somewhere safe so you don’t lose them (I should note that I didn’t lose a screw from this chair – it only had 3 to begin with! Someone else’s problem!) (and DUH I only put 3 screws back in the chair. Like I have time to find a 4th screw lololol)
Flip the pad over so you can see the staples, and start yanking them out. If you have a staple remover, that would be helpful. If not, you can use a flat head screw driver. Ideally, you want to remove all the staples – not just the ones holding the fabric down. Or you can just be sloppy and rip off the fabric, but seriously, dude, removing staples is kind of fun.
Once you’ve completely dissembled your chair seat, you should have something like this. Wooden chair seat pad thing, fabric cover, and padding.
PART 2: LAYING THE FOUNDATION
Using your fabric cover as a guide, cut out squares of the new upholstery fabric to size. If you don’t have the old fabric to use, then measure for a 4″ overlap on all sides (so my 16″ pads needed 20″ square covers). Padding can be cut to the same size as the chair seat. I initially cut off the selvedge of my fabric because I thought it looked nicest that way, but when I started ripping the rest of the seats I realized that the original upholsterer left the selvedges on. So my remaining 3 chairs have fabric selvedge, which helps with fraying.
While I did decide to add some new padding to my chairs, I did not completely replace the padding that was there. Upon inspection, it seemed to be in pretty good shape (apart from the whole falling-out-of-the-chair aspect, anyway), so I just added a layer to the top for some extra squish and called it a day. If you are completely replacing your padding, you may want to cut multiple layers.
PART 3: THE REBIRTH
Now we get to staple! Stack your padding and fabric with the wooden seat base centered at the bottom. Starting in the middle of one side, staple the fabric to the seat. Now move to the side opposite where you just stapled, pull the fabric taunt, and staple in the center. Continue working around the base of the chair, opposite sides at a time, until all 4 sides are stapled down securely. I found it was easier to do one set of sides at a time (as opposed to working all the way around at once).
Your finished seat should look like this. Woohoo!
THAT IS DAMN SEXY
AMIRITE OR AMIRITE?
For serious, though, I’m a little embarrassed at how stupidly easy this whole ordeal was. From disassembling, to cutting, to stapling, to screwing, heck – even sweeping the floor – this all took about an hour. That’s it! For four chairs!
I want to say I should have done it sooner, but damn – I don’t think I would have picked as good a fabric. Sometimes it does pay to wait! Also, this was a fairly inexpensive project – I only needed a yard and a half of fabric (again, my chair seats are 16″ square and I had 4 of ‘em). My fabric was $45 a yard, which is stupid pricey, but the batting was only $8 a yard. All together, the cost of the fabric was less than $80 – I already had the staple gun, but it’s a cheap one that cost less than $10. You could obviously make this a much cheaper project with less luxe fabric or not buying batting, but considering I paid $100 for the table & chairs (plus a matching buffet in the living room – told ya our flea market was wonderful. Oh! My old lady dining room curtains are from there, too!), I don’t think that’s a very bad deal at all! Again, for full disclosure – I received credit for this fabric in exchange for my monthly contribution to the Mood Sewing Network. I got to pick the fabric and project on my own, though :)
What about y’all? Anyone have experience with upholstery or other home decor sewing – or is that something you’d prefer to leave to someone else to do? I made someone lined curtains once (for the 12ft ceilings in his swanky loft), and UGHHH NEVER AGAIN.